Hi,
On 25 June 2018 at 07:28, <tien.fong.c...@intel.com> wrote:
> From: Tien Fong Chee <tien.fong.c...@intel.com>
>
> Add a document to describe file system firmware loader binding
> information.
>
> Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
> ---
> doc/device-tree-bindings/chosen.txt | 22 ++++++++++++
> doc/device-tree-bindings/misc/fs_loader.txt | 52
> +++++++++++++++++++++++++++++
> 2 files changed, 74 insertions(+)
> create mode 100644 doc/device-tree-bindings/misc/fs_loader.txt
>
> diff --git a/doc/device-tree-bindings/chosen.txt
> b/doc/device-tree-bindings/chosen.txt
> index c96b8f7..738673c 100644
> --- a/doc/device-tree-bindings/chosen.txt
> +++ b/doc/device-tree-bindings/chosen.txt
> @@ -73,3 +73,25 @@ Example
> u-boot,spl-boot-order = "same-as-spl", &sdmmc,
> "/sdhci@fe330000";
> };
> };
> +
> +firmware-loader property
> +------------------------
> +Multiple file system firmware loader nodes could be defined in device trees
> for
> +multiple storage type and their default partition, then a property
> +"firmware-loader" can be used to pass default firmware loader
> +node(default storage type) to the firmware loader driver.
> +
> +Example
> +-------
> +/ {
> + chosen {
> + firmware-loader = &fs_loader0;
> + };
> +
> + fs_loader0: fs_loader@0 {
This should be :
> + fs_loader0: fs-loader@0 {
since hyphen is used for node and property names. Underscore is used
for phandles (so you have that correct).
> + u-boot,dm-pre-reloc;
> + compatible = "fs_loader";
How about u-boot,fs-loader since this is U-Boot specific I think.
> + storage_device = "mmc";
storage-device
> + devpart = "0:1";
I think you should use a phandle to the node containing the mmc device to use.
storage-device = <&mmc_3 1>;
for example (meaning use that MMC, partition 1.
> + };
> +};
> diff --git a/doc/device-tree-bindings/misc/fs_loader.txt
> b/doc/device-tree-bindings/misc/fs_loader.txt
> new file mode 100644
> index 0000000..78bea66
> --- /dev/null
> +++ b/doc/device-tree-bindings/misc/fs_loader.txt
> @@ -0,0 +1,52 @@
> +* File system firmware loader
> +
> +Required properties:
> +--------------------
> +
> +- compatible: should contain "fs_loader"
> +- storage_device: which storage device loading from, could be:
> + - mmc, usb, sata, and ubi.
> +- devpart: which storage device and partition the image loading from,
> + this property is required for mmc, usb and sata.
> +- mdtpart: which partition of ubi the image loading from, this property is
> + required for ubi.
> +- ubivol: which volume of ubi the image loading from, this proprety is
> required
> + for ubi.
> +
> +Example of storage device and partition search set for mmc, usb, sata and
> +ubi in device tree source as shown in below:
> +
> + Example of storage type and device partition search set for mmc, usb,
> + sata and ubi as shown in below:
> + Example for mmc:
> + fs_loader0: fs_loader@0 {
> + u-boot,dm-pre-reloc;
> + compatible = "fs_loader";
> + storage_device = "mmc";
> + devpart = "0:1";
> + };
> +
> + Example for usb:
> + fs_loader1: fs_loader@1 {
> + u-boot,dm-pre-reloc;
> + compatible = "fs_loader";
> + storage_device = "usb";
> + devpart = "0:1";
> + };
> +
> + Example for sata:
> + fs_loader2: fs_loader@2 {
> + u-boot,dm-pre-reloc;
> + compatible = "fs_loader";
> + storage_device = "sata";
> + devpart = "0:1";
> + };
> +
> + Example for ubi:
> + fs_loader3: fs_loader@3 {
> + u-boot,dm-pre-reloc;
> + compatible = "fs_loader";
> + storage_device = "ubi";
> + mtdpart = "UBI",
> + ubivol = "ubi0";
I'm not sure about ubi. It needs to refer to a particular device I
suppose. How do we know the mapping from ubi to device?
> + };
> --
> 2.2.0
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
