Hi, On Mon, Feb 22, 2010 at 04:30:06PM +0530, Thirumalai wrote: > Hi denx, > I just want to know whether the coldfire processor is supported by > u-boot and what toolchains need to be used for compilation. Whether ELDK > will support or not ?
starting with the downside: unfortunately there is no ELDK for Coldfire. U-Boot support for Coldfire is in place and running fine so far, although not as active (and feature-rich) as PPC. Of course, it would have been helpful if you would have mentioned which Coldfire you (intend to) use! As a starting point, have a look at the evaluation boards in board/freescale/m5... I am using the toolchain from codesourcery: http://www.codesourcery.com/sgpp/lite/coldfire (go to Download and then select either uClinux or ELF) Currently I am staying with the older 4.3.3 release, but also successfully tested the current 4.4.3 for U-Boot. Regards, Wolfgang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
