> -----Original Message----- > From: Heiko Schocher [mailto:h...@denx.de] > Sent: Thursday, February 18, 2010 6:53 PM > To: U-Boot user list > Cc: Prafulla Wadaskar; Wolfgang Denk; Scott Wood; Stefan Roese > Subject: [PATCH v6] arm: add support for the suen3 board from keymile > > Add support for the ARM part of the mgcoge2, named suen3. > This board is based on the Marvell Kirkwood (88F6281) SoC. > As there come more board variants, common config options > are collected in include/configs/km_arm.h. Also, this board > use common code for all keymile boards, which is stored in > board/keymile/common/common.c > > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > Signed-off-by: Stefan Roese <s...@denx.de> > Signed-off-by: Heiko Schocher <h...@denx.de> > > --- > - changes since v1: > added comments from Wolfgang Denk: > get rid of flash_info_t define in board config > (to get this working patch 1/2 is introduced/needed) > > - changes since v2: > added comments from Wolfgang Denk > - rearranged if/else in do_spi_toggle() > - added I/O accessor functions for bootcounter > > - changes since v3: > added comment Scott Wood > - removed nand_init in do_spi_toggle() > > added comments from Prafulla Wadaskar > - km-arm.h renamed to km_arm.h > - reworked eeprom_write_enable() (deleted it) > (when reviewing this function, it cropped up, that > this pin is connected through a gpio pin, not as > in previous version, through the boco (a FPGA)) > - moved set_sda(), set_scl(), get_sda(), get_scl() > to km_arm.c > - split patch in 4 patches (for each board an extra patch) > - renamed sdramregs.txt in kwbimage.cfg, also license > info added. > > - changes since v4 > added comments from Prafulla Wadaskar > - add comments in board/keymile/km_arm/kwbimage.cfg > - cleanup define CONFIG_KIRKWOOD_GPIO > - corect wrong name at end of config file > - add only support for the suen3 target, others > follow later > > - changes since v5 > "#ifdef CONFIG_HARD_I2C" instead of "#else" > > MAINTAINERS | 2 +- > MAKEALL | 1 + > Makefile | 3 + > board/keymile/common/common.c | 6 +- > board/keymile/km_arm/Makefile | 51 ++++++ > board/keymile/km_arm/config.mk | 28 ++++ > board/keymile/km_arm/km_arm.c | 324 > +++++++++++++++++++++++++++++++++++++ > board/keymile/km_arm/kwbimage.cfg | 176 ++++++++++++++++++++ > include/configs/km_arm.h | 191 ++++++++++++++++++++++ > include/configs/suen3.h | 103 ++++++++++++ > 10 files changed, 882 insertions(+), 3 deletions(-) > create mode 100644 board/keymile/km_arm/Makefile > create mode 100644 board/keymile/km_arm/config.mk > create mode 100644 board/keymile/km_arm/km_arm.c > create mode 100644 board/keymile/km_arm/kwbimage.cfg > create mode 100644 include/configs/km_arm.h > create mode 100644 include/configs/suen3.h >
Applied to u-boot-marvell.git master branch Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
