This patch fixes the mmc tuning command failures
when tuning pattern data needs to read back for
comparision against the excpected bit pattern.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>
---
drivers/mmc/sdhci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 40e28ab..cdeba91 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -161,8 +161,8 @@ static int sdhci_send_command(struct mmc *mmc, struct
mmc_cmd *cmd,
/* We shouldn't wait for data inihibit for stop commands, even
though they might use busy signaling */
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION ||
- cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
- cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+ ((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+ cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) && !data))
mask &= ~SDHCI_DATA_INHIBIT;
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
@@ -184,8 +184,8 @@ static int sdhci_send_command(struct mmc *mmc, struct
mmc_cmd *cmd,
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
mask = SDHCI_INT_RESPONSE;
- if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
- cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+ if ((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+ cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) && !data)
mask = SDHCI_INT_DATA_AVAIL;
if (!(cmd->resp_type & MMC_RSP_PRESENT))
--
2.7.4
This email and any attachments are intended for the sole use of the named
recipient(s) and contain(s) confidential information that may be proprietary,
privileged or copyrighted under applicable law. If you are not the intended
recipient, do not read, copy, or forward this email message or any attachments.
Delete this email message and any attachments immediately.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
