When the `mmc hwpartition` command is disabled, remove the associated help
text.
Signed-off-by: Alex Kiernan <alex.kier...@gmail.com>
---
cmd/mmc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/cmd/mmc.c b/cmd/mmc.c
index c2ee2d9c0a..3920a1836a 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -935,6 +935,7 @@ U_BOOT_CMD(
"mmc part - lists available partition on current mmc device\n"
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
"mmc list - lists available devices\n"
+#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
"mmc hwpartition [args...] - does hardware partitioning\n"
" arguments (sizes in 512-byte blocks):\n"
" [user [enh start cnt] [wrrel {on|off}]] - sets user data area
attributes\n"
@@ -942,6 +943,7 @@ U_BOOT_CMD(
" [check|set|complete] - mode, complete set partitioning completed\n"
" WARNING: Partitioning is a write-once setting once it is set to
complete.\n"
" Power cycling is required to initialize partitions after set to
complete.\n"
+#endif
#ifdef CONFIG_SUPPORT_EMMC_BOOT
"mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
" - Set the BOOT_BUS_WIDTH field of the specified device\n"
--
2.17.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
