On Sat, Jun 9, 2018 at 8:26 AM Alex Kiernan <alex.kier...@gmail.com> wrote: > > On Fri, Jun 8, 2018 at 9:48 PM Adam Ford <aford...@gmail.com> wrote: > > > > When enabling BLOCK_CACHE on devices with limited RAM during SPL, > > some devices may not boot. This creates an option to enable > > block caching in SPL by defaults off. It is dependant on BLOCK_CACHE > > and SPL_BLK > > > > Fixes: 46960ad6d09b ("block: Have BLOCK_CACHE default to y in some cases") > > > > Signed-off-by: Adam Ford <aford...@gmail.com> > > > > diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig > > index 0792373cfc..8ef363b3d4 100644 > > --- a/drivers/block/Kconfig > > +++ b/drivers/block/Kconfig > > @@ -37,6 +37,13 @@ config BLOCK_CACHE > > it will prevent repeated reads from directory structures and other > > filesystem data structures. > > > > +config SPL_BLOCK_CACHE > > + bool "Use block device cache in SPL" > > + depends on BLOCK_CACHE && SPL_BLK > > + default n > > + help > > + This option enables the disk-block cache in SPL > > + > > config IDE > > bool "Support IDE controllers" > > select HAVE_BLOCK_DEVICE > > diff --git a/drivers/block/Makefile b/drivers/block/Makefile > > index 5fcafb193e..a9af28a552 100644 > > --- a/drivers/block/Makefile > > +++ b/drivers/block/Makefile > > @@ -11,4 +11,9 @@ endif > > > > obj-$(CONFIG_IDE) += ide.o > > obj-$(CONFIG_SANDBOX) += sandbox.o > > +ifdef CONFIG_SPL_BUILD > > +obj-$(SPL_BLOCK_CACHE) += blkcache.o > > CONFIG_SPL_BLOCK_CACHE? > > > +endif > > +ifndef CONFIG_SPL_BUILD > > obj-$(CONFIG_BLOCK_CACHE) += blkcache.o > > +endif > > Could this all get replaced by: > > obj-$(CONFIG_$(SPL_)BLOCK_CACHE) += blkcache.o > Nicely done. I am not that familiar with Makefiles and how to clean that up, but it seems to work work this way at least for the AM3517 EVM.
> > diff --git a/include/blk.h b/include/blk.h > > index fc0c239e46..c17c5eb047 100644 > > --- a/include/blk.h > > +++ b/include/blk.h > > @@ -111,7 +111,8 @@ struct blk_desc { > > #define PAD_TO_BLOCKSIZE(size, blk_desc) \ > > (PAD_SIZE(size, blk_desc->blksz)) > > > > -#ifdef CONFIG_BLOCK_CACHE > > +#if (defined(CONFIG_BLOCK_CACHE) && !defined(CONFIG_SPL_BUILD)) || \ > > + (defined(CONFIG_SPL_BLOCK_CACHE) && defined(CONFIG_SPL_BUILD)) > > /** > > Replace with CONFIG_IS_ENABLED? I tried replacing 'defined(x)' with 'CONFIG_IS_ENABLED(x)' and I got a bunch of build errors. The only way I could get it to work was using 'defined(x)' adam > > > * blkcache_read() - attempt to read a set of blocks from cache > > * > > -- > > 2.17.1 > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > https://lists.denx.de/listinfo/u-boot > > > > -- > Alex Kiernan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot