From: Ken Ma <m...@marvell.com>
Add a uclass which provides access to MDIO busses and includes
operations required by MDIO.
The implementation is based on the existing mii/phy/mdio data
structures and APIs.
This patch also adds evice tree binding for MDIO bus.
Signed-off-by: Ken Ma <m...@marvell.com>
---
MAINTAINERS | 1 +
doc/device-tree-bindings/mdio/mdio-bus.txt | 54 +++++++++++++
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/mdio/Kconfig | 18 +++++
drivers/mdio/Makefile | 6 ++
drivers/mdio/mdio-uclass.c | 119 +++++++++++++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/mdio.h | 62 +++++++++++++++
9 files changed, 264 insertions(+)
create mode 100644 doc/device-tree-bindings/mdio/mdio-bus.txt
create mode 100644 drivers/mdio/Kconfig
create mode 100644 drivers/mdio/Makefile
create mode 100644 drivers/mdio/mdio-uclass.c
create mode 100644 include/mdio.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 642c448..f66a904 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -335,6 +335,7 @@ M: Simon Glass <s...@chromium.org>
S: Maintained
T: git git://git.denx.de/u-boot-dm.git
F: drivers/core/
+F: drivers/mdio/
F: include/dm/
F: test/dm/
diff --git a/doc/device-tree-bindings/mdio/mdio-bus.txt
b/doc/device-tree-bindings/mdio/mdio-bus.txt
new file mode 100644
index 0000000..68d8b25
--- /dev/null
+++ b/doc/device-tree-bindings/mdio/mdio-bus.txt
@@ -0,0 +1,54 @@
+MDIO (Management Data Input/Output) busses
+
+MDIO busses can be described with a node for the MDIO master device
+and a set of child nodes for each phy on the bus.
+
+The MDIO node requires the following properties:
+- #address-cells - number of cells required to define phy address on
+ the MDIO bus.
+- #size-cells - should be zero.
+- compatible - name of MDIO bus controller following generic names
+ recommended practice.
+- reg - address and length of the MDIO register.
+
+Optional property:
+- mdio-name - MDIO bus name
+
+The child nodes of the MDIO driver are the individual PHY devices
+connected to this MDIO bus. They must have a "reg" property given the
+PHY address on the MDIO bus.
+- reg - (required) phy address in MDIO bus.
+
+Example for cp110 MDIO node at the SoC level:
+ cp0_mdio: mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ mdio-name = "cp0-mdio";
+ };
+
+ cp0_xmdio: mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x200>;
+ mdio-name = "cp0-xmdio";
+ };
+
+And at the board level, example for armada-8040-mcbin board:
+ &cp0_mdio {
+ ge_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ &cp0_xmdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ };
+ };
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 9e21b28..3fc0a90 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -44,6 +44,8 @@ source "drivers/led/Kconfig"
source "drivers/mailbox/Kconfig"
+source "drivers/mdio/Kconfig"
+
source "drivers/memory/Kconfig"
source "drivers/misc/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index a213ea9..041a7bf 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -82,6 +82,7 @@ obj-y += dfu/
obj-$(CONFIG_X86) += pch/
obj-y += phy/allwinner/
obj-y += phy/marvell/
+obj-y += mdio/
obj-y += rtc/
obj-y += scsi/
obj-y += sound/
diff --git a/drivers/mdio/Kconfig b/drivers/mdio/Kconfig
new file mode 100644
index 0000000..76e3758
--- /dev/null
+++ b/drivers/mdio/Kconfig
@@ -0,0 +1,18 @@
+#
+# MDIO infrastructure and drivers
+#
+
+menu "MDIO Support"
+
+config DM_MDIO
+ bool "Enable Driver Model for MDIO drivers"
+ depends on DM
+ help
+ Enable driver model for MDIO access.
+ Drivers provide methods to management data
+ Input/Output.
+ MDIO uclass provides interfaces to get mdio
+ udevice or mii bus from its child phy node or
+ an ethernet udevice which the phy belongs to.
+
+endmenu
diff --git a/drivers/mdio/Makefile b/drivers/mdio/Makefile
new file mode 100644
index 0000000..9b290c0
--- /dev/null
+++ b/drivers/mdio/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018 Marvell International Ltd.
+# Author: Ken Ma<m...@marvell.com>
+
+obj-$(CONFIG_DM_MDIO) += mdio-uclass.o
diff --git a/drivers/mdio/mdio-uclass.c b/drivers/mdio/mdio-uclass.c
new file mode 100644
index 0000000..251776b
--- /dev/null
+++ b/drivers/mdio/mdio-uclass.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ * Author: Ken Ma<m...@marvell.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <errno.h>
+#include <dm.h>
+#include <dm/uclass.h>
+#include <dm/uclass-internal.h>
+#include <miiphy.h>
+#include <mdio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mdio_mii_bus_get(struct udevice *mdio_dev, struct mii_dev **bus)
+{
+ *bus = *(struct mii_dev **)dev_get_uclass_platdata(mdio_dev);
+
+ return 0;
+}
+
+int mdio_device_get_from_phy(int phy_node, struct udevice **devp)
+{
+ int mdio_off;
+
+ mdio_off = fdt_parent_offset(gd->fdt_blob, phy_node);
+ return uclass_get_device_by_of_offset(UCLASS_MDIO, mdio_off,
+ devp);
+}
+
+int mdio_mii_bus_get_from_phy(int phy_node, struct mii_dev **bus)
+{
+ struct udevice *mdio_dev;
+ int ret;
+
+ ret = mdio_device_get_from_phy(phy_node, &mdio_dev);
+ if (ret)
+ return ret;
+
+ *bus = *(struct mii_dev **)dev_get_uclass_platdata(mdio_dev);
+
+ return 0;
+}
+
+int mdio_device_get_from_eth(struct udevice *eth, struct udevice **devp)
+{
+ int dev_node = dev_of_offset(eth);
+ int phy_node;
+
+ phy_node = fdtdec_lookup_phandle(gd->fdt_blob, dev_node, "phy");
+ if (phy_node > 0)
+ return mdio_device_get_from_phy(phy_node, devp);
+
+ /*
+ * If there is no phy reference under the ethernet fdt node,
+ * it is not an error since the ethernet device may do not use
+ * mode; so in this case, the output mdio device pointer is set
+ * as NULL.
+ */
+ *devp = NULL;
+ return 0;
+}
+
+int mdio_mii_bus_get_from_eth(struct udevice *eth, struct mii_dev **bus)
+{
+ struct udevice *mdio_dev;
+ int ret;
+
+ ret = mdio_device_get_from_eth(eth, &mdio_dev);
+ if (ret)
+ return ret;
+
+ if (mdio_dev)
+ *bus = *(struct mii_dev **)dev_get_uclass_platdata(mdio_dev);
+ else
+ *bus = NULL;
+
+ return 0;
+}
+
+static int mdio_uclass_pre_probe(struct udevice *dev)
+{
+ struct mii_dev **pbus = dev_get_uclass_platdata(dev);
+ struct mii_dev *bus;
+ const char *name;
+
+ bus = mdio_alloc();
+ if (!bus) {
+ printf("Failed to allocate MDIO bus @%p\n",
+ devfdt_get_addr_ptr(dev));
+ return -1;
+ }
+
+ name = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
+ "mdio-name", NULL);
+ if (name)
+ strncpy(bus->name, name, MDIO_NAME_LEN);
+ *pbus = bus;
+
+ return 0;
+}
+
+static int mdio_uclass_post_probe(struct udevice *dev)
+{
+ struct mii_dev **pbus = dev_get_uclass_platdata(dev);
+
+ return mdio_register(*pbus);
+}
+
+UCLASS_DRIVER(mdio) = {
+ .id = UCLASS_MDIO,
+ .name = "mdio",
+ .pre_probe = mdio_uclass_pre_probe,
+ .post_probe = mdio_uclass_post_probe,
+ .per_device_platdata_auto_alloc_size = sizeof(struct mii_dev *),
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index d7f9df3..170a0cc 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -49,6 +49,7 @@ enum uclass_id {
UCLASS_LPC, /* x86 'low pin count' interface */
UCLASS_MAILBOX, /* Mailbox controller */
UCLASS_MASS_STORAGE, /* Mass storage device */
+ UCLASS_MDIO, /* MDIO device */
UCLASS_MISC, /* Miscellaneous device */
UCLASS_MMC, /* SD / MMC card or chip */
UCLASS_MOD_EXP, /* RSA Mod Exp device */
diff --git a/include/mdio.h b/include/mdio.h
new file mode 100644
index 0000000..50458b1
--- /dev/null
+++ b/include/mdio.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ * Author: Ken Ma<m...@marvell.com>
+ */
+
+#ifndef _MDIO_H_
+#define _MDIO_H_
+
+#include <dm.h> /* Because we dereference struct udevice here */
+#include <phy.h>
+
+/**
+ * mdio_mii_bus_get() - Get mii bus from mdio udevice
+ *
+ * @mdio_dev: mdio udevice
+ * @bus: mii bus
+ * @returns 0 on success, error code otherwise.
+ */
+int mdio_mii_bus_get(struct udevice *mdio_dev, struct mii_dev **bus);
+
+/**
+ * mdio_device_get_from_phy() - Get the mdio udevice which the phy belongs to
+ *
+ * @phy_node: phy node offset
+ * @devp: mdio udevice
+ * @returns 0 on success, error code otherwise.
+ */
+int mdio_device_get_from_phy(int phy_node, struct udevice **devp);
+
+/**
+ * mdio_mii_bus_get_from_phy() - Get the mii bus which the phy belongs to
+ *
+ * @phy_node: phy node offset
+ * @bus: mii bus
+ * @returns 0 on success, error code otherwise.
+ */
+int mdio_mii_bus_get_from_phy(int phy_node, struct mii_dev **bus);
+
+/**
+ * mdio_device_get_from_eth() - When there is a phy reference of "phy = <&...>"
+ * under an ethernet udevice fdt node, this function can
+ * get the mdio udevice which the phy belongs to
+ *
+ * @dev: the ethernet udevice which contains the phy reference
+ * @devp: mdio udevice
+ * @returns 0 on success, error code otherwise.
+ */
+int mdio_device_get_from_eth(struct udevice *eth, struct udevice **devp);
+
+/**
+ * mdio_mii_bus_get_from_eth() - When there is a phy reference of
+ * "phy = <&...>" under an ethernet udevice fdt node, this
+ * function can get the mii bus which the phy belongs to
+ *
+ * @eth: the ethernet udevice which contains the phy reference
+ * @bus: mii bus
+ * @returns 0 on success, error code otherwise.
+ */
+int mdio_mii_bus_get_from_eth(struct udevice *eth, struct mii_dev **bus);
+
+#endif /* _MDIO_H_ */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
