LS1012A-FRDM and LS1012A-FRWY board.
1-Move all common files applicable for both boards LS1012A-FRDM
and LS1012A-FRWY into board directory ls1012afrx.
2-Restructure LS1012A-FRDM code. Only board specific files are
in LS1012A-FRDM board directory.
Signed-off-by: Pramod Kumar <pramod.kuma...@nxp.com>
---
arch/arm/Kconfig | 2 +
board/freescale/ls1012afrdm/Kconfig | 60 ----------------------
board/freescale/ls1012afrdm/MAINTAINERS | 12 +----
board/freescale/ls1012afrdm/Makefile | 4 +-
board/freescale/ls1012afrx/Kconfig | 27 ++++++++++
board/freescale/{ls1012afrdm => ls1012afrx}/eth.c | 0
.../ls1012afrdm.c => ls1012afrx/ls1012afrx.c} | 0
7 files changed, 32 insertions(+), 73 deletions(-)
create mode 100644 board/freescale/ls1012afrx/Kconfig
rename board/freescale/{ls1012afrdm => ls1012afrx}/eth.c (100%)
rename board/freescale/{ls1012afrdm/ls1012afrdm.c => ls1012afrx/ls1012afrx.c}
(100%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 350653b..c7493e4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1320,6 +1320,8 @@ source "board/freescale/ls1046ardb/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
source "board/freescale/ls1012ardb/Kconfig"
source "board/freescale/ls1012afrdm/Kconfig"
+source "board/freescale/ls1012afrx/Kconfig"
+source "board/freescale/ls1012afrwy/Kconfig"
source "board/freescale/mx31ads/Kconfig"
source "board/freescale/mx31pdk/Kconfig"
source "board/freescale/mx35pdk/Kconfig"
diff --git a/board/freescale/ls1012afrdm/Kconfig
b/board/freescale/ls1012afrdm/Kconfig
index f52a896..58e592d 100644
--- a/board/freescale/ls1012afrdm/Kconfig
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -21,63 +21,3 @@ config SYS_LS_PPA_FW_ADDR
default 0x40400000
endif
-
-if FSL_PFE
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select PHYLIB
- imply PHY_REALTEK
- imply PHY_ATHEROS
-
-config DDR_PFE_PHYS_BASEADDR
- hex "PFE DDR physical base address"
- default 0x03800000
-
-config DDR_PFE_BASEADDR
- hex "PFE DDR base address"
- default 0x83800000
-
-config PFE_EMAC1_PHY_ADDR
- hex "PFE DDR base address"
- default 0x2
-
-config PFE_EMAC2_PHY_ADDR
- hex "PFE DDR base address"
- default 0x1
-
-endif
-
-if TARGET_LS1012AFRWY
-
-config SYS_BOARD
- default "ls1012afrdm"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_SOC
- default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
- default "ls1012afrwy"
-
-config SYS_LS_PFE_FW_ADDR
- hex "Flash address of PFE firmware"
- default 0x40020000
-
-config SYS_LS_PPA_FW_ADDR
- hex "PPA Firmware Addr"
- default 0x40060000
-
-config SYS_LS_PPA_ESBC_ADDR
- hex "PPA Firmware HDR Addr"
- default 0x401f4000
-
-config SYS_LS_PFE_ESBC_ADDR
- hex "PFE Firmware HDR Addr"
- default 0x401f8000
-
-endif
-
-source "board/freescale/common/Kconfig"
diff --git a/board/freescale/ls1012afrdm/MAINTAINERS
b/board/freescale/ls1012afrdm/MAINTAINERS
index f3fcdb8..b618d78 100644
--- a/board/freescale/ls1012afrdm/MAINTAINERS
+++ b/board/freescale/ls1012afrdm/MAINTAINERS
@@ -1,17 +1,7 @@
LS1012AFRDM BOARD
M: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
S: Maintained
+F: board/freescale/ls1012afrx/
F: board/freescale/ls1012afrdm/
F: include/configs/ls1012afrdm.h
F: configs/ls1012afrdm_qspi_defconfig
-
-LS1012AFRWY BOARD
-M: Bhaskar Upadhaya <bhaskar.upadh...@nxp.com>
-S: Maintained
-F: board/freescale/ls1012afrwy/
-F: include/configs/ls1012afrwy.h
-F: configs/ls1012afrwy_qspi_defconfig
-
-M: Vinitha V Pillai <vinitha.pil...@nxp.com>
-S: Maintained
-F: configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1012afrdm/Makefile
b/board/freescale/ls1012afrdm/Makefile
index 1e53c96..a318506 100644
--- a/board/freescale/ls1012afrdm/Makefile
+++ b/board/freescale/ls1012afrdm/Makefile
@@ -4,5 +4,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += ls1012afrdm.o
-obj-$(CONFIG_FSL_PFE) += eth.o
+obj-y += ../ls1012afrx/ls1012afrx.o
+obj-$(CONFIG_FSL_PFE) += ../ls1012afrx/eth.o
diff --git a/board/freescale/ls1012afrx/Kconfig
b/board/freescale/ls1012afrx/Kconfig
new file mode 100644
index 0000000..a2884e5
--- /dev/null
+++ b/board/freescale/ls1012afrx/Kconfig
@@ -0,0 +1,27 @@
+if FSL_PFE
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select PHYLIB
+ imply PHY_REALTEK
+ imply PHY_ATHEROS
+
+config DDR_PFE_PHYS_BASEADDR
+ hex "PFE DDR physical base address"
+ default 0x03800000
+
+config DDR_PFE_BASEADDR
+ hex "PFE DDR base address"
+ default 0x83800000
+
+config PFE_EMAC1_PHY_ADDR
+ hex "PFE DDR base address"
+ default 0x2
+
+config PFE_EMAC2_PHY_ADDR
+ hex "PFE DDR base address"
+ default 0x1
+
+endif
+
+source "board/freescale/common/Kconfig"
diff --git a/board/freescale/ls1012afrdm/eth.c
b/board/freescale/ls1012afrx/eth.c
similarity index 100%
rename from board/freescale/ls1012afrdm/eth.c
rename to board/freescale/ls1012afrx/eth.c
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c
b/board/freescale/ls1012afrx/ls1012afrx.c
similarity index 100%
rename from board/freescale/ls1012afrdm/ls1012afrdm.c
rename to board/freescale/ls1012afrx/ls1012afrx.c
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
