Hi Tom,
please pull the last batch of Marvell patches for this release
(bug fixes might still be coming).
I've run checkpatch as requested and only noticed warnings that
I feel should be ignored (>80 chars etc).
Thanks,
Stefan
The following changes since commit ee1855dc52fc366f33e21182103323c236cb3346:
Prepare v2018.07-rc1 (2018-06-04 18:08:45 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to d4899b0f5ddf39de47bd952ca8484a14f03d00fe:
ARM: kirkwood: Enforce size limit for guruplug (2018-06-05 07:29:09 +0200)
----------------------------------------------------------------
Chris Packham (5):
ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled
ARM: add SBx81LIFKW board
ARM: kirkwood: SBx81LIFKW: Enable network hardware
ARM: kirkwood: Enforce size limit for sheevaplug
ARM: kirkwood: Enforce size limit for guruplug
Jon Nettleton (2):
arm: mvebu: enable sata support for clearfog
arm: mvebu: switch clearfog to use device-tree i2c and gpio
Michael Walle (2):
enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board
arm: kirkwood: lsxl: Add SPI driver model support
Rabeeh Khoury (1):
mvebu: a38x: Force receiver detected on PCIe lanes
Vagrant Cascadian (1):
Enable thumb build to reduce build size of u-boot.kwb.
arch/arm/dts/armada-388-clearfog.dts | 2 +
arch/arm/dts/kirkwood-atl-sbx81lifkw.dts | 133 ++++++++++++++
arch/arm/dts/kirkwood-lsxl.dtsi | 4 +
arch/arm/mach-kirkwood/Kconfig | 4 +
arch/arm/mach-kirkwood/include/mach/config.h | 3 +-
.../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 2 +
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 1 +
board/alliedtelesis/SBx81LIFKW/Kconfig | 12 ++
board/alliedtelesis/SBx81LIFKW/MAINTAINERS | 7 +
board/alliedtelesis/SBx81LIFKW/Makefile | 7 +
board/alliedtelesis/SBx81LIFKW/kwbimage.cfg | 47 +++++
board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c | 197 +++++++++++++++++++++
board/solidrun/clearfog/clearfog.c | 22 ---
configs/SBx81LIFKW_defconfig | 39 ++++
configs/clearfog_defconfig | 8 +
configs/lschlv2_defconfig | 18 +-
configs/lsxhl_defconfig | 3 +
configs/sheevaplug_defconfig | 1 +
include/configs/SBx81LIFKW.h | 119 +++++++++++++
include/configs/clearfog.h | 16 +-
include/configs/guruplug.h | 5 +
include/configs/sheevaplug.h | 5 +
22 files changed, 612 insertions(+), 43 deletions(-)
create mode 100644 arch/arm/dts/kirkwood-atl-sbx81lifkw.dts
create mode 100644 board/alliedtelesis/SBx81LIFKW/Kconfig
create mode 100644 board/alliedtelesis/SBx81LIFKW/MAINTAINERS
create mode 100644 board/alliedtelesis/SBx81LIFKW/Makefile
create mode 100644 board/alliedtelesis/SBx81LIFKW/kwbimage.cfg
create mode 100644 board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c
create mode 100644 configs/SBx81LIFKW_defconfig
create mode 100644 include/configs/SBx81LIFKW.h
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
