On Fri, Jun 1, 2018 at 9:52 AM, Jagan Teki <ja...@amarulasolutions.com> wrote: > On Mon, May 28, 2018 at 4:48 PM, Jagan Teki <ja...@amarulasolutions.com> > wrote: >> This series rework of previous version where it removes legacy >> usb phy handling and added phy driver on generic-phy framework. >> >> Current implementation phy driver is unable to get pinctrl, clock >> and reset details from DT since the dm code on these will add it future. >> >> Changes for v8, v9, v10: >> - rebase on master >> - collect Jun Acked-by >> - add Linux commit id details for dt-binding patch >> - fixed few commit messages >> >> Changes for v7: >> - rebase on master >> >> Changes for v6: >> - Create private config for passing through driver_data instead >> directly passing musb_config. This make room for adding new >> configs in coming patches. >> - memset to pdata in musb-new/sunxi.c >> >> Changes for v5: >> - Rework of previous series >> - Used driver_data on sunxi.c since dt supported >> - tested on bpi-m2-plus, orangepi_pc2/prime, bananapi-m64 >> >> Changes for v4: >> - Rework of previous series >> - Add Allwinner sun4i USB PHY driver >> - Drop legacy arch/arm/mach-sunxi/usb_phy.c and related code >> >> Chen-Yu Tsai (1): >> sunxi: clock: Fix OHCI clock gating for H3/H5 >> >> Jagan Teki (33): >> usb: sunxi: Simplify ccm reg base code >> musb: sunxi: Add proper macros instead of numericals >> musb: sunxi: Use simple way to fill musb_hdrc pdata >> musb: sunxi: Add fifo config >> sunxi: clock: Fix clock gating for H3/H5/A64 >> musb: sunxi: Add OTG device clkgate and reset for H3/H5 >> musb: sunxi: Use BIT instead of numerical shift >> musb: sunxi: Add support for H3/H5/A64 >> phy: Add Allwinner A64 USB PHY driver >> phy: sun4i-usb: Add id_detect and vbus_detect ops >> phy: sun4i-usb: Add H3/H5 PHY config >> phy: sun4i-usb: Add V3S PHY config >> phy: sun4i-usb: Add A83T USB PHY config >> phy: sun4i-usb: Add A10/A13/A20 PHY config >> phy: sun4i-usb: Add A31 PHY config >> phy: sun4i-usb: Add A33 USB PHY config >> phy: sun4i-usb: Add A23 USB PHY config >> device-tree-bindings: phy: Sync sun4i-usb-phy bindings >> board: sunxi: Use generic-phy for board_usb_cable_connected >> phy: sun4i-usb: Add a sunxi specific function for setting >> squelch-detect >> usb: sunxi: Switch to use generic-phy >> sunxi: Drop legacy usb_phy.c >> arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux >> configs: bananapi-m64: Enable USB OTG peripheral mode >> ARM: dts: sun8i: a83t: Sync usbphy node from Linux >> arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux >> ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux >> configs: bananapi-m2-plus: Enable USB OTG peripheral mode >> arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic >> arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux >> configs: orangepi-pc2: Enable USB OTG peripheral mode >> arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux >> configs: orangepi-prime: Enable USB OTG peripheral mode >> >> Jun Nie (1): >> sunxi: h3: Sync OTG and HCI nodes from Linux DT > > Applied to u-boot-sunxi/master
Hi Jagan, Have you tested these patches on A64 boards? It doesn't work for me on Pinebook anymore. Regards, Vasily > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
