On 1 June 2018 at 02:45, Ley Foon Tan <ley.foon....@intel.com> wrote:
> Add code to reset all reset signals as in serial DT node. A reset property is
> an optional feature,
> so do not fail if a reset property is not present.
>
> If a reset property is discovered, then use it to deassert, thus bringing the
> IP out of reset.
>
> Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
> Reviewed-by: Marek Vasut <ma...@denx.de>
> ---
> drivers/serial/ns16550.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
Reviewed-by: Simon Glass <s...@chromium.org>
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index 53550bf..9c80090 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -9,6 +9,7 @@
> #include <dm.h>
> #include <errno.h>
> #include <ns16550.h>
> +#include <reset.h>
> #include <serial.h>
> #include <watchdog.h>
> #include <linux/types.h>
> @@ -177,6 +178,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
> #if defined(CONFIG_ARCH_OMAP2PLUS)
> serial_out(0x7, &com_port->mdr1); /* mode select reset
> TL16C750*/
> #endif
> +
Unrelated change?
> serial_out(UART_MCRVAL, &com_port->mcr);
> serial_out(ns16550_getfcr(com_port), &com_port->fcr);
> if (baud_divisor != -1)
> @@ -370,6 +372,12 @@ static int ns16550_serial_setbrg(struct udevice *dev,
> int baudrate)
> int ns16550_serial_probe(struct udevice *dev)
> {
> struct NS16550 *const com_port = dev_get_priv(dev);
> + struct reset_ctl_bulk reset_bulk;
> + int ret;
> +
> + ret = reset_get_bulk(dev, &reset_bulk);
> + if (!ret)
> + reset_deassert_bulk(&reset_bulk);
>
> com_port->plat = dev_get_platdata(dev);
> NS16550_init(com_port, -1);
> --
> 2.2.2
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
