On Mon, Feb 15, 2010 at 10:32 PM, Wolfgang Denk <w...@denx.de> wrote: > Dear Michael Zaidman, > > In message <660c0f821002150322g34255468re9cf03d2ed493...@mail.gmail.com> you > wrote: >> >> > Just out of interest, what exactly do you test there? Do you have >> > any >> > way of measuring if the LEDs work or not? >> >> The test blinks the LEDs few times and performs running "1" >> ilumination. Of course only visual control is possible. The general > > This is not acceptable as a POST then. Only sich tests can be used > where it is possible to automatically detect the test result. Tests > that require interactive handling or manual inspection as in your case > do not fit into this setup. > > Best regards, > > Wolfgang Denk >
Ok, got it. I moved the diagnostics LEDs sanity test into misc_init_f which is called even earlier than post_init_f. Thanks, Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot