This function was never used in SPL and the default implementation of
dram_bank_mmu_setup() does the same thing. The only difference is the
part which configures OCRAM as cachable, which doesn't really work as
it covers more than the OCRAM.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Chin Liang See <chin.liang....@intel.com>
Cc: Dinh Nguyen <dingu...@kernel.org>
---
drivers/ddr/altera/sdram_arria10.c | 25 -------------------------
1 file changed, 25 deletions(-)
diff --git a/drivers/ddr/altera/sdram_arria10.c
b/drivers/ddr/altera/sdram_arria10.c
index 706a038b88..1f2b7f4819 100644
--- a/drivers/ddr/altera/sdram_arria10.c
+++ b/drivers/ddr/altera/sdram_arria10.c
@@ -713,28 +713,3 @@ int ddr_calibration_sequence(void)
return 0;
}
-
-void dram_bank_mmu_setup(int bank)
-{
- bd_t *bd = gd->bd;
- int i;
-
- debug("%s: bank: %d\n", __func__, bank);
- for (i = bd->bi_dram[bank].start >> 20;
- i < (bd->bi_dram[bank].start + bd->bi_dram[bank].size) >> 20;
- i++) {
-#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
- set_section_dcache(i, DCACHE_WRITETHROUGH);
-#else
- set_section_dcache(i, DCACHE_WRITEBACK);
-#endif
- }
-
- /* same as above but just that we would want cacheable for ocram too */
- i = CONFIG_SYS_INIT_RAM_ADDR >> 20;
-#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
- set_section_dcache(i, DCACHE_WRITETHROUGH);
-#else
- set_section_dcache(i, DCACHE_WRITEBACK);
-#endif
-}
--
2.17.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
