2018-05-24 15:54 GMT+08:00 Maxime Ripard <maxime.rip...@bootlin.com>:
> Hi,
>
> On Thu, May 24, 2018 at 12:38:19PM +0800, Jun Nie wrote:
>> Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit
>> 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one
>> powering-only) and a miniHDMI port.
>>
>> DTS file is from Linux kernel with removing some nodes that are not needed
>> in u-boot or not merged into u-boot yet.
>>
>> Signed-off-by: Icenowy Zheng <icen...@aosc.io>
>> Signed-off-by: Jun Nie <jun....@linaro.org>
>
>
> Don't forget to CC me on the sunxi-related patches.
Sure, will add your email in the script.
>
>> ---
>> arch/arm/dts/Makefile | 1 +
>> arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 68
>> +++++++++++++++++++++++++
>> board/sunxi/MAINTAINERS | 5 ++
>> configs/bananapi_m2_zero_defconfig | 15 ++++++
>> 4 files changed, 89 insertions(+)
>> create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> create mode 100644 configs/bananapi_m2_zero_defconfig
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 20a4c37..8d6fab2 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -338,6 +338,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
>> sun8i-a83t-cubietruck-plus.dtb \
>> sun8i-a83t-tbs-a711.dts
>> dtb-$(CONFIG_MACH_SUN8I_H3) += \
>> + sun8i-h2-plus-bananapi-m2-zero.dtb \
>> sun8i-h2-plus-orangepi-zero.dtb \
>> sun8i-h3-bananapi-m2-plus.dtb \
>> sun8i-h3-libretech-all-h3-cc.dtb \
>> diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> new file mode 100644
>> index 0000000..92e8cf4
>> --- /dev/null
>> +++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> @@ -0,0 +1,68 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2017 Icenowy Zheng <icen...@aosc.io>
>> + *
>> + * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
>> + * Copyright (C) 2016 Chen-Yu Tsai <w...@csie.org>
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun8i-h3.dtsi"
>> +#include "sunxi-common-regulators.dtsi"
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +
>> +/ {
>> + model = "Banana Pi BPI-M2-Zero";
>> + compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + serial1 = &uart1;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> +
>> + pwr_led {
>> + label = "bananapi-m2-zero:red:pwr";
>> + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
>> + default-state = "on";
>> + };
>> + };
>> +
>> + gpio_keys {
>> + compatible = "gpio-keys";
>> +
>> + sw4 {
>> + label = "power";
>> + linux,code = <BTN_0>;
>> + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
>> + };
>> + };
>> +};
>> +
>> +&mmc0 {
>> + vmmc-supply = <®_vcc3v3>;
>> + bus-width = <4>;
>> + /*
>> + * On the production batch of this board the card detect GPIO is
>> + * high active (card inserted), although on the early samples it's
>> + * low active.
>> + */
>> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
>> + status = "okay";
>> +};
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> +
>> +&uart1 {
>> + status = "okay";
>> +};
>
> Why not using straight the DT from linux here? There's a couple of
> things missing from this one (the pinctrl nodes, for example).
I had thought that pinctrl is not merged yet in u-boot per the
comments for patch V1. Will
keep it in next version.
WIFI is removed because it shall not work in u-boot.
ehci0/ohci0 are removed because they are still missing in h3.dtsi.
>
>> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
>> index 5eb8bbe..0d904d9 100644
>> --- a/board/sunxi/MAINTAINERS
>> +++ b/board/sunxi/MAINTAINERS
>> @@ -363,6 +363,11 @@ M: Icenowy Zheng <icen...@aosc.io>
>> S: Maintained
>> F: configs/Sinovoip_BPI_M2_Plus_defconfig
>>
>> +SINOVOIP BPI M2 ZERO BOARD
>> +M: Icenowy Zheng <icen...@aosc.io>
>> +S: Maintained
>> +F: configs/Sinovoip_BPI_M2_Zero_defconfig
>> +
>> SINOVOIP BPI M3 A83T BOARD
>> M: VishnuPatekar <vishnupatekar0...@gmail.com>
>> S: Maintained
>> diff --git a/configs/bananapi_m2_zero_defconfig
>> b/configs/bananapi_m2_zero_defconfig
>> new file mode 100644
>> index 0000000..b919d8b
>> --- /dev/null
>> +++ b/configs/bananapi_m2_zero_defconfig
>> @@ -0,0 +1,15 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_SUNXI=y
>> +CONFIG_SYS_TEXT_BASE=0x4a000000
>
> Did you run savedefconfig recently? That should be the default nowadays.
Yes, this config is copied from saved defconfig. I rebased to
denx/next to generate patch.
Or I should prepare the patch based on denx/master?
>
>> +CONFIG_MACH_SUN8I_H3=y
>> +CONFIG_DRAM_CLK=408
>> +CONFIG_DRAM_ZQ=3881979
>> +CONFIG_DRAM_ODT_EN=y
>> +CONFIG_MMC0_CD_PIN=""
>
> That doesn't match the DT.
Right. I see Kconfig default cd_pin is PF6. Not sure why this line is
generated. Will remove it
in next version.
>
> Maxime
>
> --
> Maxime Ripard, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> https://bootlin.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
