On 18.5.2018 15:26, Jean-Jacques Hiblot wrote:
>
>
> On 18/05/2018 15:24, Jean-Jacques Hiblot wrote:
>>
>>
>> On 18/05/2018 13:15, Michal Simek wrote:
>>> By enabling BLK by default this is the next driver which needs to get
>>> support for DM_USB. Adding generic DWC3 glue logic which only
>>> parse nodes and read device mode. Based on it probe proper
>>> host/peripheral DWC3 drivers for it.
>>>
>>> Signed-off-by: Michal Simek <michal.si...@xilinx.com>
>>> ---
>>>
>>> Changes in v2:
>>> - Change style to avoid correct but not nice indentation by using char
>>> *driver variable (suggested by Marek)
>>>
>>> drivers/usb/dwc3/Kconfig | 6 ++
>>> drivers/usb/dwc3/Makefile | 1 +
>>> drivers/usb/dwc3/dwc3-generic.c | 157 ++++++++++++++++++++++++++++++++
>>> 3 files changed, 164 insertions(+)
>>> create mode 100644 drivers/usb/dwc3/dwc3-generic.c
>>>
>>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>>> index ae7fc1c6304d..943b7630eba4 100644
>>> --- a/drivers/usb/dwc3/Kconfig
>>> +++ b/drivers/usb/dwc3/Kconfig
>>> @@ -37,6 +37,12 @@ config USB_DWC3_OMAP
>>> Say 'Y' here if you have one such device
>>> +config USB_DWC3_GENERIC
>>> + bool "Xilinx ZynqMP and similar Platforms"
>>> + depends on DM_USB && USB_DWC3
>>> + help
>>> + Some platforms can reuse this DWC3 generic implementation.
>>> +
>>> config USB_DWC3_UNIPHIER
>>> bool "DesignWare USB3 Host Support on UniPhier Platforms"
>>> depends on ARCH_UNIPHIER && USB_XHCI_DWC3
>>> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
>>> index cd18b8d9ec02..60b5515a67da 100644
>>> --- a/drivers/usb/dwc3/Makefile
>>> +++ b/drivers/usb/dwc3/Makefile
>>> @@ -7,6 +7,7 @@ dwc3-y := core.o
>>> obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o
>>> obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
>>> +obj-$(CONFIG_USB_DWC3_GENERIC) += dwc3-generic.o
>>> obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o
>>> obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
>>> obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG) += samsung_usb_phy.o
>>> diff --git a/drivers/usb/dwc3/dwc3-generic.c
>>> b/drivers/usb/dwc3/dwc3-generic.c
>>> new file mode 100644
>>> index 000000000000..ca63eac3d98e
>>> --- /dev/null
>>> +++ b/drivers/usb/dwc3/dwc3-generic.c
>>> @@ -0,0 +1,157 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Generic DWC3 Glue layer
>>> + *
>>> + * Copyright (C) 2016 - 2018 Xilinx, Inc.
>>> + *
>>> + * Based on dwc3-omap.c.
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <dm.h>
>>> +#include <dm/device-internal.h>
>>> +#include <dm/lists.h>
>>> +#include <linux/usb/otg.h>
>>> +#include <linux/compat.h>
>>> +#include <linux/usb/ch9.h>
>>> +#include <linux/usb/gadget.h>
>>> +#include <malloc.h>
>>> +#include <usb.h>
>>> +#include "core.h"
>>> +#include "gadget.h"
>>> +#include "linux-compat.h"
>>> +
>>> +DECLARE_GLOBAL_DATA_PTR;
>>> +
>>> +int usb_gadget_handle_interrupts(int index)
>>> +{
>>> + struct dwc3 *priv;
>>> + struct udevice *dev;
>>> + int ret;
>>> +
>>> + ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev);
>>> + if (!dev || ret) {
>>> + pr_err("No USB device found\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> + priv = dev_get_priv(dev);
>>> +
>>> + dwc3_gadget_uboot_handle_interrupt(priv);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dwc3_generic_peripheral_probe(struct udevice *dev)
>>> +{
>>> + struct dwc3 *priv = dev_get_priv(dev);
>>> +
>>> + return dwc3_init(priv);
>>> +}
>>> +
>>> +static int dwc3_generic_peripheral_remove(struct udevice *dev)
>>> +{
>>> + struct dwc3 *priv = dev_get_priv(dev);
>>> +
>>> + dwc3_remove(priv);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dwc3_generic_peripheral_ofdata_to_platdata(struct udevice
>>> *dev)
>>> +{
>>> + struct dwc3 *priv = dev_get_priv(dev);
>>> + int node = dev_of_offset(dev);
>>> +
>>> + priv->regs = (void *)devfdt_get_addr(dev);
>>> + priv->regs += DWC3_GLOBALS_REGS_START;
>>> +
>>> + priv->maximum_speed = usb_get_maximum_speed(node);
>>> + if (priv->maximum_speed == USB_SPEED_UNKNOWN) {
>>> + pr_err("Invalid usb maximum speed\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> + priv->dr_mode = usb_get_dr_mode(node);
>>> + if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
>>> + pr_err("Invalid usb mode setup\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dwc3_generic_peripheral_bind(struct udevice *dev)
>>> +{
>>> + return device_probe(dev);
>> This is wrong place to probe the device.
>> What must be done is to probe the device when it is first used.
>> I have a patch in progress for this. When it's cleaned up I'll share a
>> repo so that you can have look and maybe pick it up.
> Well the series is already applied. I'll send the patch to ML in this case.
Yes. Please cc me if you want to test something.
Thanks,
Michal
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
