This removes the unused clock and RAM config options that were cargo- culted when this board was copied from the DA850 EVM.
Signed-off-by: David Lechner <da...@lechnology.com> --- include/configs/legoev3.h | 54 --------------------------------------- 1 file changed, 54 deletions(-) diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 6972cedabf..9eb95bc030 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -39,60 +39,6 @@ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ - DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_SPI0 | \ - DAVINCI_SYSCFG_SUSPSRC_UART1 | \ - DAVINCI_SYSCFG_SUSPSRC_I2C) - -/* - * PLL configuration - */ - -#define CONFIG_SYS_DA850_PLL0_PLLM 24 -#define CONFIG_SYS_DA850_PLL1_PLLM 21 - -/* - * DDR2 memory configuration - */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ - DV_DDR_PHY_EXT_STRBEN | \ - (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR ( \ - (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ - (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ - (0x3 << DV_DDR_SDCR_CL_SHIFT) | \ - (0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \ - (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) - -/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */ -#define CONFIG_SYS_DA850_DDR2_SDBCR2 0 - -#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ - (14 << DV_DDR_SDTMR1_RFC_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ - (1 << DV_DDR_SDTMR1_WR_SHIFT) | \ - (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ - (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ - (0 << DV_DDR_SDTMR1_WTR_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ - (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ - (0 << DV_DDR_SDTMR2_XP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ - (17 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ - (199 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ - (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_CKE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000494 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 - /* * Serial Driver info */ -- 2.17.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
