Am Samstag, 19. Mai 2018, 01:56:33 CEST schrieb Otto Blom: > UBIFS error (ubi0:0 pid 0): crypto_comp_decompress: cannot decompress > 2801 bytes, compressor lzo, error -6
LZO_E_LOOKBEHIND_OVERRUN... > UBIFS error (ubi0:0 pid 0): ubifs_decompress: cannot decompress 2801 > bytes, compressor lzo, error -6 > ubifs_decompress RC: -6 len: 4096 out_len: 3377 > UBIFS error (ubi0:0 pid 0): read_block: bad data node (block 3, inode 68) > magic 0x6101831 > crc 0xf15144c6 > node_type 1 (data node) > group_type 0 (no node group) > sqnum 3276 > len 2849 > key (68, data, 3) > size 4096 > compr_typ 1 > data size 2801 > data: > UBIFS error (ubi0:0 pid 0): do_readpage: cannot read page 3 of inode > 68, error -22 > Error reading file '/boot/Image' So, LZO *does* return an error. Did you edit the logs in your last mails? Or was some U-Boot silencing option enabled? Please double-check whether your setup is correct. Does it work if you disable compression? Your UBIFS image looks good. I checked the data node by hand and was able to read that file on 4.9.100 and linus as of today. Thanks, //richard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
