On 14.05.2018 22:43, Marek Vasut wrote:
On 05/14/2018 09:43 PM, Simon Goldschmidt wrote:
On 14.05.2018 17:51, Stefan Roese wrote:
On 14.05.2018 11:06, Marek Vasut wrote:
On 05/14/2018 11:01 AM, Simon Goldschmidt wrote:
On 14.05.2018 10:17, Marek Vasut wrote:
On 05/14/2018 10:03 AM, Simon Goldschmidt wrote:
On 12.05.2018 22:27, Marek Vasut wrote:
The global data are in the .data section, so there's no point in
reserving any space for it above stack. Put stack at the end of
SRAM.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Chin Liang See <chin.liang....@intel.com>
Cc: Dinh Nguyen <dingu...@kernel.org>
---
include/configs/socfpga_common.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/include/configs/socfpga_common.h
b/include/configs/socfpga_common.h
index 4de2aa7929..cb67d539b1 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -35,10 +35,8 @@
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000
#define CONFIG_SYS_INIT_RAM_SIZE 0x40000 /* 256KB */
#endif
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
I think this interferes with the bootcount being stored at the end of
SRAM. See the defconfigs of 'is1' and 'sr1500' boards - or my local
defconfig here :-)
I'd really like to keep some room here for bootcounter and some
related
things I store here.
So if I understand it correctly, before this patch, the boards
overwrote
the global data ?
Ehrm, reading up on the init code path in the S and C files, it seems
like that, yes. I just used the two boards as an example. Are they
actively maintained? get_maintainer.pl shows the boards are maintained
by denx, so maybe you could clarify this?
+CC Stefan.
Thanks. At the time I added the bootcounter support on this platform,
it used to work. I might have missed something though. Right now,
I don't have access to such a platform, so its hard for me to test
something. If you have some patches to fix any potential overlapping
memory usages, I'll gladly review them.
I just checked out ae996c80 and from what I can tell, the RAM layout was
the same at that time: include/generated/generated-asm-offsets.h contains:
- #define GENERATED_GBL_DATA_SIZE 208
- #define GD_SIZE 200
That leaves us with an 8 byte alignment gap at the end of the SRAM and
that's where the boot counter is located. So the global data is not
overwritten, but this is more or less by chance, any change to the
struct definition might change this.
Looking at just another example: the x600 board defines its SRAM_SIZE 8
bytes smaller than what it really is. That seems like a good idea for
socfpga, too. I'll see if I can provide a patch.
This looks like a hack and a bogus one. Lying about RAM size is never a
good idea.
Slightly off-topic: I have a constellation where the boot-counter is not
reset although the power has been pulled. This device has big capacitors
and the SRAM content seems to survive although the processor is reset.
To me it seems as if looking at the boot reason might be safer than
checking for a magic word... Any ideas?
What boot reason options do you get ?
The reset manager has a status register [1] that has various bits for
different reasons of warm or cold reset. I'm just not sure if it's worth
going through the hassle or if I'm alone with that problem of the
bootcounter surviving a pull-and-replug.
[1] https://www.altera.com/hps/cyclone-v/topic/sfo1410067763568.html
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
