Currently, qemu_arm_defconfig and qemu_arm64_defconfig only work with
the 'highmem=off' parameter passed to QEMU's virt machine. The reason is
that when 'highmem' is not disabled, QEMU appends 64-bit a memory
resource to the PCI controller's regions property in DT in addition to
the 32-bit PCI memory window in low memory. And the current DT parsing
code picks the last (thus the 64-bit one) memory resource, whose address
eventually gets silently truncated to 32 bits because
CONFIG_SYS_PCI_64BIT is not set, which obviously causes PCI to break.
Avoid this problem by ignoring memory regions whose addresses are above
the 32-bit boundary when CONFIG_SYS_PCI_64BIT is not set.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkky...@iki.fi>
---
drivers/pci/pci-uclass.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 49be1ebdd7..1cd1e409e3 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -860,6 +860,13 @@ static int decode_regions(struct pci_controller *hose,
ofnode parent_node,
} else {
continue;
}
+
+ if (!IS_ENABLED(CONFIG_SYS_PCI_64BIT) &&
+ type == PCI_REGION_MEM && upper_32_bits(pci_addr)) {
+ debug(" - beyond the 32-bit boundary, ignoring\n");
+ continue;
+ }
+
pos = -1;
for (i = 0; i < hose->region_count; i++) {
if (hose->regions[i].flags == type)
--
2.16.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
