From: Tien Fong Chee <tien.fong.c...@intel.com>

SoC FPGA info is required in both SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
---
 arch/arm/mach-socfpga/board.c        | 4 ++++
 arch/arm/mach-socfpga/misc_arria10.c | 5 -----
 arch/arm/mach-socfpga/spl.c          | 6 ++++++
 3 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
index 6e0b4b3c4e..189e12a668 100644
--- a/arch/arm/mach-socfpga/board.c
+++ b/arch/arm/mach-socfpga/board.c
@@ -10,6 +10,7 @@
 #include <fdtdec.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/clock_manager.h>
+#include <asm/arch/misc.h>
 #include <asm/io.h>
 
 #include <usb.h>
@@ -30,6 +31,9 @@ int board_init(void)
 #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
        /* configuring the clock based on handoff */
        cm_basic_init(gd->fdt_blob);
+
+       /* Add device descriptor to FPGA device table */
+       socfpga_fpga_add();
 #endif
 
        return 0;
diff --git a/arch/arm/mach-socfpga/misc_arria10.c 
b/arch/arm/mach-socfpga/misc_arria10.c
index e1d80a5a76..47a9d50ef1 100644
--- a/arch/arm/mach-socfpga/misc_arria10.c
+++ b/arch/arm/mach-socfpga/misc_arria10.c
@@ -104,11 +104,6 @@ int arch_early_init_r(void)
        /* assert reset to all except L4WD0 and L4TIMER0 */
        socfpga_per_reset_all();
 
-       /* configuring the clock based on handoff */
-       /* TODO: Add call to cm_basic_init() */
-
-       /* Add device descriptor to FPGA device table */
-       socfpga_fpga_add();
        return 0;
 }
 #else
diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index 515832031a..0c9d7388e6 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -14,6 +14,7 @@
 #include <asm/arch/system_manager.h>
 #include <asm/arch/freeze_controller.h>
 #include <asm/arch/clock_manager.h>
+#include <asm/arch/misc.h>
 #include <asm/arch/scan_manager.h>
 #include <asm/arch/sdram.h>
 #include <asm/arch/scu.h>
@@ -191,6 +192,11 @@ void spl_board_init(void)
 
        /* enable console uart printing */
        preloader_console_init();
+
+       WATCHDOG_RESET();
+
+       /* Add device descriptor to FPGA device table */
+       socfpga_fpga_add();
 }
 
 void board_init_f(ulong dummy)
-- 
2.16.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to