This patch series brings the internal DISPLAY5 development in sync
with mainline.
Lukasz Majewski (21):
display5: factory: Add support for BOOT_FROM = FACTORY switch
display5: config: factory: Setup IP config data according to LEG
production setup
display5: config: Add "factory" (1MiB) SPI-NOR partition in u-boot
display5: config: Provide command to flash the whole SPI-NOR memory
display5: spl: Check return code of the env_* functions
display5: config: Reset the board when bootm fails
display5: config: Remove support for Linux initramfs recovery image
boot
display5: config: Update SPI-NOR partition for larger
swupdate-initramfs
display5: config: factory: Extend mtdparts to support LEG factory
partition
display5: Support for the emergency PAD pressing
display5: wdt: Enable WDT support (both SPL and u-boot)
display5: config: Provide 'tftp_mmc_rootfs_bkp' command to write
BACKUP rootfs
display5: config: factory: Update BACKUP rootfs in factory mode
display5: config: Update swupdate initramfs file name (now supporting
ext4)
display5: ddr: Enable support for DDR3 auto calibration
display5: net: Add function to read ethaddr from iMX6 fuses
display5: config: Add cma=256M to command line arguments
display5: config: Reduce rootfs2 (BACKUP) size from 1528M to 512M
display5: display5_defconfig: Enable support for gpt command (CMD_GPT)
in production u-boot
display5: config: Add GPT verification and restoration code on
SWUpdate entry
display5: Add missing environment.h include to avoid warning
board/liebherr/display5/common.c | 10 ++++
board/liebherr/display5/common.h | 1 +
board/liebherr/display5/display5.c | 41 +++++++++++++++
board/liebherr/display5/spl.c | 78 +++++++++++++++++++++++++++-
configs/display5_defconfig | 6 ++-
configs/display5_factory_defconfig | 3 +-
include/configs/display5.h | 102 ++++++++++++++++++++++---------------
7 files changed, 194 insertions(+), 47 deletions(-)
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
