The s3c6400.h file is only for S3C64XX cpu and the pheripheral port
address(0x70000000 - 0x7fffffff) exists at only S3C64XX cpu, so they
should be included by only S3C64XX cpu.
Signed-off-by: Joonyoung Shim <jy0922.s...@samsung.com>
---
cpu/arm1176/cpu.c | 2 ++
cpu/arm1176/start.S | 4 ++++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
index 2c0014f..befa0cd 100644
--- a/cpu/arm1176/cpu.c
+++ b/cpu/arm1176/cpu.c
@@ -33,7 +33,9 @@
#include <common.h>
#include <command.h>
+#ifdef CONFIG_S3C64XX
#include <asm/arch/s3c6400.h>
+#endif
#include <asm/system.h>
static void cache_flush (void);
diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S
index 68a356d..e2b6c9b 100644
--- a/cpu/arm1176/start.S
+++ b/cpu/arm1176/start.S
@@ -35,7 +35,9 @@
#ifdef CONFIG_ENABLE_MMU
#include <asm/proc/domain.h>
#endif
+#ifdef CONFIG_S3C64XX
#include <asm/arch/s3c6400.h>
+#endif
#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE
@@ -190,10 +192,12 @@ mmu_disable:
#endif
mmu_disable_phys:
+#ifdef CONFIG_S3C64XX
/* Peri port setup */
ldr r0, =0x70000000
orr r0, r0, #0x13
mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff)
+#endif
/*
* Go setup Memory and board specific bits prior to relocation.
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
