Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.pack...@gmail.com>
---
arch/arm/dts/kirkwood-iconnect.dts | 195 +++++++++++++++++++++++++++++
configs/iconnect_defconfig | 3 +-
2 files changed, 197 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/kirkwood-iconnect.dts
diff --git a/arch/arm/dts/kirkwood-iconnect.dts
b/arch/arm/dts/kirkwood-iconnect.dts
new file mode 100644
index 000000000000..4a512d80912c
--- /dev/null
+++ b/arch/arm/dts/kirkwood-iconnect.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "Iomega Iconnect";
+ compatible = "iom,iconnect-1.1", "iom,iconnect",
"marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ linux,initrd-start = <0x4500040>;
+ linux,initrd-end = <0x4800000>;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_button_otb: pmx-button-otb {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_led_level: pmx-led-level {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_led_power_blue: pmx-led-power-blue {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_power_red: pmx-power-red {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_usb1: pmx-led-usb1 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_usb2: pmx-led-usb2 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_led_usb3: pmx-led-usb3 {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_led_usb4: pmx-led-usb4 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_led_otb: pmx-led-otb {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ };
+ i2c@11000 {
+ status = "okay";
+
+ lm63: lm63@4c {
+ compatible = "national,lm63";
+ reg = <0x4c>;
+ };
+ };
+ serial@12000 {
+ status = "ok";
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
+ &pmx_led_power_red &pmx_led_usb1
+ &pmx_led_usb2 &pmx_led_usb3
+ &pmx_led_usb4 &pmx_led_otb >;
+ pinctrl-names = "default";
+
+ led-level {
+ label = "led_level";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ power-blue {
+ label = "power:blue";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ power-red {
+ label = "power:red";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+ usb1 {
+ label = "usb1:blue";
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ usb2 {
+ label = "usb2:blue";
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ usb3 {
+ label = "usb3:blue";
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ usb4 {
+ label = "usb4:blue";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+ otb {
+ label = "otb:blue";
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
+ pinctrl-names = "default";
+
+ otb {
+ label = "OTB Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0xc0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0xa0000 0x20000>;
+ };
+
+ partition@100000 {
+ label = "zImage";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@540000 {
+ label = "initrd";
+ reg = <0x540000 0x300000>;
+ };
+
+ partition@980000 {
+ label = "boot";
+ reg = <0x980000 0x1f400000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@11 {
+ reg = <11>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
index 80b8ff999a55..236b91df45e6 100644
--- a/configs/iconnect_defconfig
+++ b/configs/iconnect_defconfig
@@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_ICONNECT=y
CONFIG_IDENT_STRING=" Iomega iConnect"
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-iconnect"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="iconnect => "
@@ -18,6 +19,7 @@ CONFIG_CMD_JFFS2=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x80000@0x0(uboot),0x20000@0x80000(uboot_env),-@0xa0000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
# CONFIG_MMC is not set
CONFIG_SYS_NS16550=y
@@ -25,4 +27,3 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
-CONFIG_OF_LIBFDT=y
--
2.17.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
