Change to use devfdt_get_addr_index() function to get fdt address.
Original code has compilation warning below:
drivers/spi/cadence_qspi.c: In function ‘cadence_spi_ofdata_to_platdata’:
drivers/spi/cadence_qspi.c:297:18: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
plat->regbase = (void *)data[0];
^
drivers/spi/cadence_qspi.c:298:18: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
plat->ahbbase = (void *)data[2];
^
Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
drivers/spi/cadence_qspi.c | 13 ++-----------
1 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 7b312f8..f80d073 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -284,18 +284,9 @@ static int cadence_spi_ofdata_to_platdata(struct udevice
*bus)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
int subnode;
- u32 data[4];
- int ret;
- /* 2 base addresses are needed, lets get them from the DT */
- ret = fdtdec_get_int_array(blob, node, "reg", data, ARRAY_SIZE(data));
- if (ret) {
- printf("Error: Can't get base addresses (ret=%d)!\n", ret);
- return -ENODEV;
- }
-
- plat->regbase = (void *)data[0];
- plat->ahbbase = (void *)data[2];
+ plat->regbase = (void *)devfdt_get_addr_index(bus, 0);
+ plat->ahbbase = (void *)devfdt_get_addr_index(bus, 1);
plat->is_decoded_cs = fdtdec_get_bool(blob, node, "cdns,is-decoded-cs");
plat->fifo_depth = fdtdec_get_uint(blob, node, "cdns,fifo-depth", 128);
plat->fifo_width = fdtdec_get_uint(blob, node, "cdns,fifo-width", 4);
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
