Add code to reset all reset signals as in Ethernet DT node. A reset property is
an optional feature,
so only print out a warning and do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.
Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
drivers/net/designware.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 765e356..03ef1eb 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -16,6 +16,7 @@
#include <miiphy.h>
#include <malloc.h>
#include <pci.h>
+#include <reset.h>
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/kernel.h>
@@ -711,6 +712,16 @@ int designware_eth_probe(struct udevice *dev)
}
#endif
+#ifdef CONFIG_DM_RESET
+ struct reset_ctl_bulk reset_bulk;
+
+ ret = reset_get_bulk(dev, &reset_bulk);
+ if (ret)
+ dev_warn(dev, "Can't get reset: %d\n", ret);
+ else
+ reset_deassert_bulk(&reset_bulk);
+#endif
+
#ifdef CONFIG_DM_PCI
/*
* If we are on PCI bus, either directly attached to a PCI root port,
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
