That is necessary for using automatic calibration on A64 eMMC.
Signed-off-by: Vasily khoruzhick <anars...@gmail.com>
---
arch/arm/mach-sunxi/Kconfig | 1 +
drivers/mmc/sunxi_mmc.c | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b868f0e350..774a39f580 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -256,6 +256,7 @@ config MACH_SUN50I
select SUNXI_DE2
select SUNXI_GEN_SUN6I
select SUNXI_HIGH_SRAM
+ select MMC_SUNXI_HAS_NEW_MODE
select SUPPORT_SPL
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index df6f32850e..06b0fd491c 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -167,8 +167,12 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv,
unsigned int hz)
if (new_mode) {
#ifdef CONFIG_MMC_SUNXI_HAS_NEW_MODE
+#ifdef CONFIG_MACH_SUN50I
+ val = 0;
+#else
val = CCM_MMC_CTRL_MODE_SEL_NEW;
setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
+#endif
#endif
} else {
val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
--
2.17.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
