[U-Boot] [PATCH] arm64: zynqmp: Wire watchdog internals

[Michal Simek]

Enable watchdog in full U-Boot.

Similar changes were done by:
"arm: zynq: Wire watchdog internals"
(sha1: e6cc3b25d721c3001019f8b44bfaae2a57255162)

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 board/xilinx/zynqmp/zynqmp.c | 42 ++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 65bd12024f2e..cb110762083b 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -10,11 +10,13 @@
 #include <ahci.h>
 #include <scsi.h>
 #include <malloc.h>
+#include <wdt.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/psu_init_gpl.h>
 #include <asm/io.h>
+#include <dm/uclass.h>
 #include <usb.h>
 #include <dwc3-uboot.h>
 #include <zynqmppl.h>
@@ -23,6 +25,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
+static struct udevice *watchdog_dev;
+#endif
+
 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
     !defined(CONFIG_SPL_BUILD)
 static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
@@ -282,6 +288,11 @@ int board_early_init_f(void)
        ret = psu_init();
 #endif
 
+#if defined(CONFIG_WDT) && !defined(CONFIG_SPL_BUILD)
+       /* bss is not cleared at time when watchdog_reset() is called */
+       watchdog_dev = NULL;
+#endif
+
        return ret;
 }
 
@@ -300,9 +311,40 @@ int board_init(void)
        }
 #endif
 
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
+       if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
+               puts("Watchdog: Not found!\n");
+       } else {
+               wdt_start(watchdog_dev, 0, 0);
+               puts("Watchdog: Started\n");
+       }
+#endif
+
        return 0;
 }
 
+#ifdef CONFIG_WATCHDOG
+/* Called by macro WATCHDOG_RESET */
+void watchdog_reset(void)
+{
+# if !defined(CONFIG_SPL_BUILD)
+       static ulong next_reset;
+       ulong now;
+
+       if (!watchdog_dev)
+               return;
+
+       now = timer_get_us();
+
+       /* Do not reset the watchdog too often */
+       if (now > next_reset) {
+               wdt_reset(watchdog_dev);
+               next_reset = now + 1000;
+       }
+# endif
+}
+#endif
+
 int board_early_init_r(void)
 {
        u32 val;
-- 
2.17.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot