Hi Tom,
please pull from u-boot-imx, thanks !
-- The following changes since commit
6d7403bf72b5ea46497fe8222d0303cb79563379:
doc: mxc_hab: Update i.MX HAB documentation (2018-03-11 16:00:21 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to b4e9bdcd05ac83146ad16802a94db3e78f530d1a:
mx6cuboxi: Fix some memory configuration errors (2018-04-15 11:56:21
+0200)
----------------------------------------------------------------
Anatolij Gustschin (1):
imx: fix CAAM base for i.MX6UL
Bryan O'Donoghue (6):
imx: mx7: Fix CONFIG_SERIAL_TAG compilation
imx: mx7: Add comment to describe OTP TESTER registers
warp7: Set u-boot serial# based on OTP value
imximage: Encase majority of header in __ASSEMBLY__ declaration
imx: hab: Provide hab_auth_img_or_fail command
imx: mx7: snvs: Add an SNVS init routine
Eran Matityahu (4):
mx7_common: Fix SPL compilation with secure boot support enabled
Makefile: Build firmware-ivt image type for HAB verification also
for mx7
imx7: Add src_base structure define macro
imx7: spl: Check for Serial Downloader in spl_boot_device
Heinrich Schuchardt (1):
wandboard: remove superfluous include
Ian Ray (1):
board: ge: bx50v3: enable backlight on demand
Jon Nettleton (1):
mx6cuboxi: Fix some memory configuration errors
Jörg Krause (2):
ARM: dts: imx6ul: add wdog3
ARM: dts: imx6ull: add wdog3
Ken Lin (1):
arm: imx: Add Winbond SPI-NOR support for Advantech DMS-BA16 board
Lukasz Majewski (2):
imx: board: Add support for the K+P's kp_imx6q_tpc board
boot: script: The boot.scr file for K+P's boards
Marek Vasut (1):
ARM: mx6: ddr: Add write leveling correction code
Nandor Han (1):
board: ge: ppd: Fix environment variable location
Rasmus Villemoes (2):
Makefile: always preserve output for images that can contain HAB
Blocks
tools/imximage: use 0x prefix in HAB Blocks line
Sriram Dash (2):
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig
drivers: i2c: mxc: Update support to 8 I2C controllers
Tom Rini (2):
imx31_phycore: Delete
mx31ads: Delete
Trent Piepho (1):
imx: Create distinct pre-processed mkimage config files
Vanessa Maegima (1):
pico-imx7d: Replace fatload command
Makefile | 8 +-
arch/arm/Kconfig | 18 ----
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 23 +++++
arch/arm/dts/imx6ul.dtsi | 8 ++
arch/arm/dts/imx6ull.dtsi | 8 ++
arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +
arch/arm/include/asm/arch-mx7/imx-regs.h | 2 +
arch/arm/include/asm/mach-imx/sys_proto.h | 1 +
arch/arm/mach-imx/Makefile | 15 +--
arch/arm/mach-imx/hab.c | 35 +++++++
arch/arm/mach-imx/mx6/Kconfig | 11 ++
arch/arm/mach-imx/mx6/ddr.c | 24 +++++
arch/arm/mach-imx/mx7/Makefile | 2 +-
arch/arm/mach-imx/mx7/snvs.c | 22 ++++
arch/arm/mach-imx/mx7/soc.c | 24 +++++
arch/arm/mach-imx/spl.c | 23 +++++
board/freescale/mx31ads/Kconfig | 15 ---
board/freescale/mx31ads/MAINTAINERS | 6 --
board/freescale/mx31ads/Makefile | 8 --
board/freescale/mx31ads/lowlevel_init.S | 268
------------------------------------------------
board/freescale/mx31ads/mx31ads.c | 114 ---------------------
board/freescale/mx31ads/u-boot.lds | 110 --------------------
board/ge/bx50v3/bx50v3.c | 45 ++++----
board/imx31_phycore/Kconfig | 12 ---
board/imx31_phycore/MAINTAINERS | 11 --
board/imx31_phycore/Makefile | 9 --
board/imx31_phycore/imx31_phycore.c | 154
----------------------------
board/imx31_phycore/lowlevel_init.S | 88 ----------------
board/k+p/bootscripts/tpcboot.cmd | 96 ++++++++++++++++++
board/k+p/kp_imx6q_tpc/Kconfig | 12 +++
board/k+p/kp_imx6q_tpc/MAINTAINERS | 6 ++
board/k+p/kp_imx6q_tpc/Makefile | 11 ++
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 302
++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 338
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/solidrun/mx6cuboxi/mx6cuboxi.c | 3 +-
board/wandboard/wandboard.c | 1 -
board/warp7/warp7.c | 14 +++
configs/dms-ba16-1g_defconfig | 1 +
configs/dms-ba16_defconfig | 1 +
configs/imx31_phycore_defconfig | 19 ----
configs/imx31_phycore_eet_defconfig | 25 -----
configs/kp_imx6q_tpc_defconfig | 42 ++++++++
configs/mx31ads_defconfig | 15 ---
configs/pico-imx7d_defconfig | 1 +
doc/README.mxc_hab | 14 +--
drivers/i2c/Kconfig | 169
++++++++++++++++++++++++++++++-
drivers/i2c/mxc_i2c.c | 56 ++++++++++
drivers/video/Makefile | 1 -
drivers/video/s6e63d6.c | 60 -----------
include/configs/ge_bx50v3.h | 1 +
include/configs/imx31_phycore.h | 156
----------------------------
include/configs/kp_imx6q_tpc.h | 141 ++++++++++++++++++++++++++
include/configs/ls1012a_common.h | 3 -
include/configs/ls1043a_common.h | 5 -
include/configs/ls1046a_common.h | 5 -
include/configs/ls1088a_common.h | 5 -
include/configs/ls2080a_common.h | 5 -
include/configs/ls2080a_emu.h | 3 -
include/configs/ls2080a_simu.h | 3 -
include/configs/mx31ads.h | 145 --------------------------
include/configs/mx53ppd.h | 4 +-
include/configs/mx7_common.h | 3 +
include/configs/pico-imx7d.h | 4 +-
include/configs/warp7.h | 3 +
include/imximage.h | 2 +
include/s6e63d6.h | 21 ----
scripts/Makefile.lib | 2 +-
scripts/Makefile.spl | 2 +-
tools/imximage.c | 2 +-
69 files changed, 1439 insertions(+), 1331 deletions(-)
create mode 100644 arch/arm/mach-imx/mx7/snvs.c
delete mode 100644 board/freescale/mx31ads/Kconfig
delete mode 100644 board/freescale/mx31ads/MAINTAINERS
delete mode 100644 board/freescale/mx31ads/Makefile
delete mode 100644 board/freescale/mx31ads/lowlevel_init.S
delete mode 100644 board/freescale/mx31ads/mx31ads.c
delete mode 100644 board/freescale/mx31ads/u-boot.lds
delete mode 100644 board/imx31_phycore/Kconfig
delete mode 100644 board/imx31_phycore/MAINTAINERS
delete mode 100644 board/imx31_phycore/Makefile
delete mode 100644 board/imx31_phycore/imx31_phycore.c
delete mode 100644 board/imx31_phycore/lowlevel_init.S
create mode 100644 board/k+p/bootscripts/tpcboot.cmd
create mode 100644 board/k+p/kp_imx6q_tpc/Kconfig
create mode 100644 board/k+p/kp_imx6q_tpc/MAINTAINERS
create mode 100644 board/k+p/kp_imx6q_tpc/Makefile
create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
delete mode 100644 configs/imx31_phycore_defconfig
delete mode 100644 configs/imx31_phycore_eet_defconfig
create mode 100644 configs/kp_imx6q_tpc_defconfig
delete mode 100644 configs/mx31ads_defconfig
delete mode 100644 drivers/video/s6e63d6.c
delete mode 100644 include/configs/imx31_phycore.h
create mode 100644 include/configs/kp_imx6q_tpc.h
delete mode 100644 include/configs/mx31ads.h
delete mode 100644 include/s6e63d6.h
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
