Daniel Gorsulowski wrote: > This patch adds support for esd gmbh OTC570 board. > The OTC570 is based on an Atmel AT91SAM9263 SoC. > > Signed-off-by: Daniel Gorsulowski <daniel.gorsulow...@esd.eu> > --- > v2: Applyed suggestions according to > http://lists.denx.de/pipermail/u-boot/2010-January/066948.html > - removed video commands they should go into common > - swapped copyright places > - removed some #ifdef / #ifndef > - converted element initializations in panel_info > - replaced some puts() with printf() > - moved CONFIG_SYS_HZ below board and cpu defines > > MAINTAINERS | 1 + > MAKEALL | 1 + > Makefile | 3 + > board/esd/otc570/Makefile | 55 +++++++ > board/esd/otc570/config.mk | 1 + > board/esd/otc570/otc570.c | 365 > ++++++++++++++++++++++++++++++++++++++++++ > board/esd/otc570/partition.c | 37 +++++ > include/configs/otc570.h | 246 ++++++++++++++++++++++++++++ > tools/Makefile | 3 + > tools/logos/esd.bmp | Bin 0 -> 35078 bytes > 10 files changed, 712 insertions(+), 0 deletions(-) > create mode 100644 board/esd/otc570/Makefile > create mode 100644 board/esd/otc570/config.mk > create mode 100644 board/esd/otc570/otc570.c > create mode 100644 board/esd/otc570/partition.c > create mode 100644 include/configs/otc570.h > create mode 100644 tools/logos/esd.bmp > Applied Thanks, Tom
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
