On Thu, Apr 12, 2018 at 5:20 AM, Stefan Roese <s...@denx.de> wrote:
> Hi Matt,
>
> (added Joe as network custodian to Cc)
>
>
> On 27.03.2018 19:18, Matt Pelland wrote:
>>
>> mvneta already supports setting the MAC address but this was only done
>> internally when some other part of U-Boot tries to actually use the
>> interface. This commit exposes this functionality to the ethernet core
>> code so that the MAC addresses of all interfaces are configured
>> correctly even if they are not used before loading Linux.
>>
>> Signed-off-by: Matt Pelland <mpell...@starry.com>
>> ---
>> drivers/net/mvneta.c | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
>> index 83e3153768..fdff772178 100644
>> --- a/drivers/net/mvneta.c
>> +++ b/drivers/net/mvneta.c
>> @@ -890,6 +890,16 @@ static void mvneta_mac_addr_set(struct mvneta_port
>> *pp, unsigned char *addr,
>> mvneta_set_ucast_addr(pp, addr[5], queue);
>> }
>> +static int mvneta_write_hwaddr(struct udevice *dev)
>> +{
>> + mvneta_mac_addr_set(
>> + dev_get_priv(dev),
>> + ((struct eth_pdata *)dev_get_platdata(dev))->enetaddr,
>> + rxq_def);
>> +
>> + return 0;
>> +}
>> +
>> /* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */
>> static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc,
>> u32 phys_addr, u32 cookie)
>> @@ -1753,6 +1763,7 @@ static const struct eth_ops mvneta_ops = {
>> .send = mvneta_send,
>> .recv = mvneta_recv,
>> .stop = mvneta_stop,
>> + .write_hwaddr = mvneta_write_hwaddr,
>> };
>> static int mvneta_ofdata_to_platdata(struct udevice *dev)
>>
>
> Reviewed-by: Stefan Roese <s...@denx.de>
>
> Joe, will you pick this one up (if you have no objections)? Or should I
> push it via the Marvell repo?
I'll take it.
Cheers,
-Joe
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
