Hi Marek,

On 11/04/2018 16:37, Marek Vasut wrote:
> On 04/11/2018 04:29 PM, Neil Armstrong wrote:
>> This is a port of the dwc3-of-simple driver from Linux to enable/deassert
>> clock and resets of a simple DWC3 Controller HW glue.
>>
>> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> 
> Looks good, except can we reduce the number of ifdefs, ie. by using
> empty functions if DM_* is not defined ?

For reset, yes, for clock only the get_bulk and release_bulk...

Should I re-spin ?

Neil
> 
>> ---
>>  drivers/usb/host/Kconfig          |   7 +++
>>  drivers/usb/host/Makefile         |   1 +
>>  drivers/usb/host/dwc3-of-simple.c | 123 
>> ++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 131 insertions(+)
>>  create mode 100644 drivers/usb/host/dwc3-of-simple.c
>>
>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>> index a7249b7..6caa615 100644
>> --- a/drivers/usb/host/Kconfig
>> +++ b/drivers/usb/host/Kconfig
>> @@ -21,6 +21,13 @@ config USB_XHCI_DWC3
>>        Say Y or if your system has a Dual Role SuperSpeed
>>        USB controller based on the DesignWare USB3 IP Core.
>>  
>> +config USB_XHCI_DWC3_OF_SIMPLE
>> +    bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
>> +    select MISC
>> +    help
>> +      Support USB2/3 functionality in simple SoC integrations with
>> +      USB controller based on the DesignWare USB3 IP Core.
>> +
>>  config USB_XHCI_MVEBU
>>      bool "MVEBU USB 3.0 support"
>>      default y
>> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
>> index 9819489..abe4f90 100644
>> --- a/drivers/usb/host/Makefile
>> +++ b/drivers/usb/host/Makefile
>> @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
>>  # xhci
>>  obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o
>>  obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
>> +obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
>>  obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
>>  obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o
>>  obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
>> diff --git a/drivers/usb/host/dwc3-of-simple.c 
>> b/drivers/usb/host/dwc3-of-simple.c
>> new file mode 100644
>> index 0000000..9abe450
>> --- /dev/null
>> +++ b/drivers/usb/host/dwc3-of-simple.c
>> @@ -0,0 +1,123 @@
>> +/*
>> + * dwc3-of-simple.c - OF glue layer for simple integrations
>> + *
>> + * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com
>> + *
>> + * Author: Felipe Balbi <ba...@ti.com>
>> + *
>> + * Copyright (C) 2018 BayLibre, SAS
>> + * Author: Neil Armstrong <narmst...@baylibre.com>
>> + *
>> + * SPDX-License-Identifier:     GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <fdtdec.h>
>> +#include <reset.h>
>> +#include <clk.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +struct dwc3_of_simple {
>> +#if CONFIG_IS_ENABLED(CLK)
>> +    struct clk_bulk         clks;
>> +#endif
>> +#if CONFIG_IS_ENABLED(DM_RESET)
>> +    struct reset_ctl_bulk   resets;
>> +#endif
>> +};
>> +
>> +#if CONFIG_IS_ENABLED(DM_RESET)
>> +static int dwc3_of_simple_reset_init(struct udevice *dev,
>> +                                 struct dwc3_of_simple *simple)
>> +{
>> +    int ret;
>> +
>> +    ret = reset_get_bulk(dev, &simple->resets);
>> +    if (ret)
>> +            return ret;
>> +
>> +    ret = reset_deassert_bulk(&simple->resets);
>> +    if (ret) {
>> +            reset_release_bulk(&simple->resets);
>> +            return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +#endif
>> +
>> +#if CONFIG_IS_ENABLED(CLK)
>> +static int dwc3_of_simple_clk_init(struct udevice *dev,
>> +                               struct dwc3_of_simple *simple)
>> +{
>> +    int ret;
>> +
>> +    ret = clk_get_bulk(dev, &simple->clks);
>> +    if (ret)
>> +            return ret;
>> +
>> +    ret = clk_enable_bulk(&simple->clks);
>> +    if (ret) {
>> +            clk_release_bulk(&simple->clks);
>> +            return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +#endif
>> +
>> +static int dwc3_of_simple_probe(struct udevice *dev)
>> +{
>> +#if CONFIG_IS_ENABLED(DM_RESET) || CONFIG_IS_ENABLED(CLK)
>> +    struct dwc3_of_simple *simple = dev_get_platdata(dev);
>> +    int ret;
>> +#endif
>> +
>> +#if CONFIG_IS_ENABLED(CLK)
>> +    ret = dwc3_of_simple_clk_init(dev, simple);
>> +    if (ret)
>> +            return ret;
>> +#endif
>> +
>> +#if CONFIG_IS_ENABLED(DM_RESET)
>> +    ret = dwc3_of_simple_reset_init(dev, simple);
>> +    if (ret)
>> +            return ret;
>> +#endif
>> +
>> +    return 0;
>> +}
>> +
>> +static int dwc3_of_simple_remove(struct udevice *dev)
>> +{
>> +#if CONFIG_IS_ENABLED(DM_RESET) || CONFIG_IS_ENABLED(CLK)
>> +    struct dwc3_of_simple *simple = dev_get_platdata(dev);
>> +#endif
>> +
>> +#if CONFIG_IS_ENABLED(DM_RESET)
>> +    reset_release_bulk(&simple->resets);
>> +#endif
>> +
>> +#if CONFIG_IS_ENABLED(CLK)
>> +    clk_release_bulk(&simple->clks);
>> +#endif
>> +
>> +    return dm_scan_fdt_dev(dev);
>> +}
>> +
>> +static const struct udevice_id dwc3_of_simple_ids[] = {
>> +    { .compatible = "amlogic,meson-gxl-dwc3" },
>> +    { }
>> +};
>> +
>> +U_BOOT_DRIVER(dwc3_of_simple) = {
>> +    .name = "dwc3-of-simple",
>> +    .id = UCLASS_SIMPLE_BUS,
>> +    .of_match = dwc3_of_simple_ids,
>> +    .probe = dwc3_of_simple_probe,
>> +    .remove = dwc3_of_simple_remove,
>> +    .platdata_auto_alloc_size = sizeof(struct dwc3_of_simple),
>> +    .flags = DM_FLAG_ALLOC_PRIV_DMA,
>> +};
>>
> 
> 

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to