Le 09/04/2018 à 15:58, Jean-Jacques Hiblot a écrit :
On 09/04/2018 14:02, Guillaume Gardet wrote:
Hi Jaehoon,
There are problems with SD card access on Samsung Chromebook (snow) with latest
master (and also 2018.05-rc1 and 2018.03).
eMMC is ok, but SD card access leads to 'unable to select a mode' problem. If I
disable HS mode, I can access the SD card without problem:
********************************************************************************
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 23f642980bf..28f4fa0f213 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -508,7 +508,8 @@ void dwmci_setup_cfg(struct mmc_config *cfg, struct
dwmci_host *host,
cfg->host_caps |= MMC_MODE_4BIT;
cfg->host_caps &= ~MMC_MODE_8BIT;
}
- cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
+ /* Temp workaround for Chromebook snow to avoid the 'unable to select a
mode' error */
+// cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
}
********************************************************************************
Once we try to select HS mode, all access to SD card result in failure, even
when trying to setup a lower frequency mode, including SD legacy at 25 MHz.
Any idea what is going? Maybe you have fixes pending?
Can try with MMC_MODE_HS | MMC_MODE_HS_52MHz but with a lower max-frequency
(<25MHz) ? It would be interesting to know if it could come from a frequency
limitation.
I already tried to change SD_HS freq (in mmc_mode2freq) from 50000000 to
25000000 with no difference.
Is there some pad configuration to do when using higher frequency?
I do not think so.
Guillaume
JJ
Guillaume
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
