CONFIG_NETCONSOLE on the p2020ds is functional with the tsec driver.
But the printf in adjust_link() which is called by startup_tsec()
called by tsec_init() in tsec.c is making it impossible to use.
For example typing 12345 on the netconsole causes the message to be
printed for every character:
=> Speed: 1000, full duplex
1Speed: 1000, full duplex
2Speed: 1000, full duplex
3Speed: 1000, full duplex
4Speed: 1000, full duplex
5Speed: 1000, full duplex
Signed-off-by: Ed Swarthout <ed.swarth...@freescale.com>
---
Based on a suggestion from Peter Tyser, check env and only disable if
currently using netconsole.
drivers/net/tsec.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index d8b6619..42083de 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -847,8 +847,10 @@ static void adjust_link(struct eth_device *dev)
break;
}
- printf("Speed: %d, %s duplex\n", priv->speed,
- (priv->duplexity) ? "full" : "half");
+ if (strcmp(getenv("stdin"), "nc") != 0) {
+ printf("Speed: %d, %s duplex\n", priv->speed,
+ (priv->duplexity) ? "full" : "half");
+ }
} else {
printf("%s: No link.\n", dev->name);
--
1.6.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
