Hi Andre, On Wed, Mar 14, 2018 at 7:26 AM, Andre Przywara <andre.przyw...@arm.com> wrote: > A minor update to the v3 version sent earlier this month. > I reworked patch 09 to drop the direct MMC environment for 32-bit Allwinner > boards as well and keep the current MMC offset. > For now I also dropped the two patches changing (back) the MMC regulator. > I still believe they are good to have and keep them as U-Boot specific > .dtsi files in my tree, possibly posting them later again. > > As the previous version, this combines the EMAC DT support update with > an update of the full Linux kernel DTs for all H3, H5 and A64 boards. > > Patch 01 leaves some hint in the README how to avoid the situation > when overrunning U-Boot's image size on 64-bit boards. > The old v2 EMAC DT update series is in patches 02-08, it prepares U-Boot's > EMAC driver for using the new DT binding used in Linux, also updates > the DTs to the new EMAC DT node already. > > Changes to sync the whole of U-Boot's DT files for the H3, H5 and A64 SoCs > to those from Linux are in the following patches. However this first requires > lifting the space limit we currently have due to the raw MMC environment. > Patch 09 disables that for all sunxi boards, to give us finally some > space. Patches 10 and 11 consequently revert the disabling of features we > saw a few weeks ago to migitate the size problem. > > Patches 12-19 then bring in the Linux DTs, split by SoCs, with the .dtsi > files first, then the board files. > > Merging the H3 and H5 device tree files brings in significant changes, > also to the structure of the .dtsi files. However U-Boot's own DT usage > is pretty limited, so it doesn't matter. > > The huge benefit of syncing the DTs is that we can use U-Boot's DT copy > to directly pass it to the kernel, avoiding to actually load a .dtb file > from somewhere. To allows seamless and automatic UEFI booting, so > distribution installer images should just work (TM). > > As a goodie the final patch brings in the actual SoPine + baseboard DT > files, which we were completely missing so far. > > This is based on sunxi/master (2d53018a0ef2). > > Cheers, > Andre. > > Changelog v3 .. v4: > - remove MMC environment for all Allwinner boards (including 32 bit ones) > - keep MMC environment offset to the old values > - drop DT adjustments to use fixed MMC regulator > > Changelog v2 .. v3: > 01: added, was on the list before > 02: drop redundant H5 line > 03-08: unchanged > 09-20: added > > Changelog v1 .. v2: > 01, 02, 03: unchanged > 04, 05, 06, 07: added > > Andre Przywara (19): > sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted > Firmware > sunxi: gpio: add missing compatible strings > net: sun8i-emac: support new pinctrl DT bindings > net: sun8i-emac: add support for new EMAC DT binding > arm: dts: sunxi: update A64 to new EMAC binding > arm: dts: sunxi: update H3 to new EMAC binding > arm: dts: sunxi: update H5 to new EMAC binding > net: sun8i-emac: remove support for old binding > sunxi: disable direct MMC environment > sunxi: revert disabling of features > Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"
Can you rebase and fix few checkpatch issue on these 11 patches? Jagan. -- Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
