[U-Boot] [PATCH 6/6] arm: zynq: Use fixed partitions for spi flash for zc770 xm010

[Michal Simek]

Sync with mainline.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/arm/dts/zynq-zc770-xm010.dts | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/zynq-zc770-xm010.dts 
b/arch/arm/dts/zynq-zc770-xm010.dts
index 2c594b7ecc6c..a779672f3add 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -74,14 +74,17 @@
        num-cs = <4>;
        is-decoded-cs = <0>;
        flash@0 {
-               compatible = "sst25wf080";
+               compatible = "sst25wf080", "jedec,spi-nor";
                reg = <1>;
                spi-max-frequency = <1000000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               partition@test {
-                       label = "spi-flash";
-                       reg = <0x0 0x100000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       partition@0 {
+                               label = "data";
+                               reg = <0x0 0x100000>;
+                       };
                };
        };
 };
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot