Dear Mike Frysinger, In message <201001251847.28034.vap...@gentoo.org> you wrote: > ... > these have been merged already
Thanks for the confirmation - I still had the USB patches marked as open. > > 6698 01/17 Mike Frysinger [U-Boot] [PATCH 1/1] [rfc] usb: musb: some > > more Blackfin stuff > > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73841 > > needs maintainer feedback for a better way of addressing the issue OK. > > 6820 01/19 Mike Frysinger [U-Boot] [PATCH] usb: musb: fix Blackfin > > DMA register padding > > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73965 > > usb maintainer has picked it up, so i guess you can ignore Well, I close a patch only after it was finally rejected or applied to mainline. > > 6974 01/21 Mike Frysinger [U-Boot] [PATCH 3/3] asm-arm/unaligned.h: > > switch to asm- > generic/unaligned.h > > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/74116 > > > > 6975 01/21 Mike Frysinger [U-Boot] [PATCH 2/3] > > asm-blackfin/unaligned.h: add for zlib code > > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/74117 > > > > 6976 01/21 Mike Frysinger [U-Boot] [PATCH 1/3] > > asm-generic/unaligned.h: dynamic default unaligned > accesses > > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/74118 > > patch 1/3 and 2/3 need merging (fix build errors for all Blackfin boards). > patch 3/3 is up to Tom i guess ... doesnt matter much to me as i dont do arm, > but i thought i'd help him out with a general solution for all rather than > continuing the copy & paste duplication tradition. I see. I guess I have your ACK for BF? Tom, can you please send an ACK for the ARM part? Then I would apply all 3 of them... > > 6977 01/21 Mike Frysinger [U-Boot] [PATCH] smc91111_eeprom: fix > > linking error > > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/74119 > > net maintainer has picked it up, so i guess you can ignore Thanks again for the feedback. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Nail here --X-- for new monitor. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
