On Thu, Mar 22, 2018 at 12:33 AM, André Przywara <andre.przyw...@arm.com> wrote: > Hi, > > On 21/03/18 18:40, Jagan Teki wrote: >> On Wed, Mar 14, 2018 at 7:26 AM, Andre Przywara <andre.przyw...@arm.com> >> wrote: >>> As we are running into issues where the final U-Boot FIT image file is >>> exceeding our size limit, add a hint to the README.sunxi64 file >>> to point out the possibility of building non-debug versions of the ATF >>> binary. These are about 12KB smaller than the standard debug build, and >>> so allow successful U-Boot builds for many boards with the Allwinner H5 >>> SoC. >>> Please note that under normal circumstances the debug build is still >>> recommended, as it gives valuable clues in case something goes wrong in >>> the ATF. >>> >>> Signed-off-by: Andre Przywara <andre.przyw...@arm.com> >>> Acked-by: Maxime Ripard <maxime.rip...@bootlin.com> >>> --- >>> board/sunxi/README.sunxi64 | 6 ++++++ >>> 1 file changed, 6 insertions(+) >>> >>> diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 >>> index 5a363d27b8..df1dbc818f 100644 >>> --- a/board/sunxi/README.sunxi64 >>> +++ b/board/sunxi/README.sunxi64 >>> @@ -38,6 +38,12 @@ the root of your U-Boot build directory (or create a >>> symbolic link). >>> $ export BL31=/src/arm-trusted-firmware/build/sun50iw1p1/debug/bl31.bin >>> (adjust the actual path accordingly) >>> >>> +If you run into size issues with the resulting U-Boot image file, it might >>> +help to use a release build, by using "DEBUG=0" when building bl31.bin. >> >> I thought I've commented this in previous version patch, w/o DEBUG=0 >> can also build release right? like >> >> make PLAT=sun50iw1p1 bl31 > > Yes, DEBUG=0 is the (current) default in the Makefile. But what's the > question? The original recipe said DEBUG=1, so stating DEBUG=0 makes it > obvious what to change. Given that with DEBUG not defined to 1, ATF is > *completely* silent, I would very much like to encourage people to use > DEBUG builds, and just suggesting DEBUG=0 as a workaround.
My question is without mentioning any DEBUG just build like this make PLAT=sun50iw1p1 bl31 will be similar to make PLAT=sun50iw1p1 DEBUG=0 bl31 right? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
