Dear Tom, Could you pull these patches to u-boot/master? If there is a problem, let me know, plz.
The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30: Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500) are available in the Git repository at: git://git.denx.de/u-boot-mmc.git master for you to fetch changes up to dfca07d60e8d1977fff5531291d0a39b8384d0a9: mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support (2018-02-19 20:19:20 +0900) ---------------------------------------------------------------- Alex Kiernan (1): mmc: Fix uninitialised priv member Jean-Jacques Hiblot (15): mmc: omap_hsmmc: cleanup clock configuration mmc: omap_hsmmc: set MMC mode in the UHSMS bit field mmc: omap_hsmmc: Add tuning support mmc: omap_hsmmc: Workaround for errata id i802 mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl mmc: omap_hsmmc: update mmc->clock with the actual bus speed mmc: omap_hsmmc: implement send_init_stream callback mmc: omap_hsmmc: add signal voltage selection support ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes dts: am57xx-beagle-x15: disable UHS and HS200 support dts: am57xx-idk: disable HS200 support configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support mmc: Fix bug in sd_set_card_speed() mmc: fix bug in mmc_startup_v4() Kishon Vijay Abraham I (11): mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios mmc: omap_hsmmc: add support to set default io voltage mmc: omap_hsmmc: Enable DDR mode support mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot mmc: omap_hsmmc: Add support to set IODELAY values mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions mmc: omap_hsmmc: allow mmc clock to be gated ARM: OMAP5: set mmc clock frequency to 192MHz ARM: dts: DRA7: use new dra7-specific compatible string ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1 Marek Vasut (10): mmc: uniphier-sd: Add compatible strings for RCar Gen2 mmc: uniphier-sd: Use mmc_of_parse() mmc: uniphier-sd: Add Renesas RCar quirks mmc: uniphier-sd: Handle Renesas div-by-1 mmc: uniphier-sd: Handle DMA completion flag differences mmc: uniphier-sd: Handle bus width 0 mmc: uniphier-sd: Always check controller version mmc: uniphier-sd: Properly handle pin voltage configuration mmc: uniphier-sd: Export registers and IO accessors mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support Masahiro Yamada (1): mmc: use pr_* log functions arch/arm/dts/am57xx-beagle-x15.dts | 6 + arch/arm/dts/am57xx-idk-common.dtsi | 2 + arch/arm/dts/dra7.dtsi | 22 +- arch/arm/include/asm/arch-omap5/clock.h | 2 +- arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | 3 + arch/arm/include/asm/arch-omap5/sys_proto.h | 7 + arch/arm/include/asm/omap_mmc.h | 59 +- arch/arm/mach-omap2/omap5/dra7xx_iodelay.c | 30 + arch/arm/mach-omap2/omap5/hw_data.c | 10 +- board/ti/am57xx/board.c | 30 + board/ti/dra7xx/evm.c | 29 + configs/dra7xx_evm_defconfig | 3 + configs/dra7xx_hs_evm_defconfig | 3 + drivers/mmc/Kconfig | 9 + drivers/mmc/Makefile | 1 + drivers/mmc/mmc.c | 71 +- drivers/mmc/omap_hsmmc.c | 954 +++++++++++++++++++++-- drivers/mmc/uniphier-sd-rcar.c | 288 +++++++ drivers/mmc/uniphier-sd.c | 274 +++---- drivers/mmc/uniphier-sd.h | 155 ++++ include/configs/am57xx_evm.h | 2 - include/configs/dra7xx_evm.h | 2 - include/mmc.h | 1 + 23 files changed, 1697 insertions(+), 266 deletions(-) create mode 100644 drivers/mmc/uniphier-sd-rcar.c create mode 100644 drivers/mmc/uniphier-sd.h _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot