This converts the following to Kconfig:
CONFIG_BOOTCOUNT_ENV
Signed-off-by: Alex Kiernan <alex.kier...@gmail.com>
Reviewed-by: Lukasz Majewski <lu...@denx.de>
---
Changes in v2: None
README | 11 -----------
configs/draco_defconfig | 1 +
configs/etamin_defconfig | 1 +
configs/pxm2_defconfig | 1 +
configs/rastaban_defconfig | 1 +
configs/rut_defconfig | 1 +
configs/thuban_defconfig | 1 +
drivers/bootcount/Kconfig | 12 ++++++++++++
include/configs/siemens-am33x-common.h | 2 --
scripts/config_whitelist.txt | 1 -
10 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/README b/README
index cc341ac..da77484 100644
--- a/README
+++ b/README
@@ -714,17 +714,6 @@ The following options need to be configured:
RAM and NFS.
- Bootcount:
- CONFIG_BOOTCOUNT_ENV
- If no softreset save registers are found on the hardware
- "bootcount" is stored in the environment. To prevent a
- saveenv on all reboots, the environment variable
- "upgrade_available" is used. If "upgrade_available" is
- 0, "bootcount" is always 0, if "upgrade_available" is
- 1 "bootcount" is incremented in the environment.
- So the Userspace Applikation must set the "upgrade_available"
- and "bootcount" variable to 0, if a boot was successfully.
-
-- Pre-Boot Commands:
CONFIG_PREBOOT
When this option is #defined, the existence of the
diff --git a/configs/draco_defconfig b/configs/draco_defconfig
index 693d91c..0416daa 100644
--- a/configs/draco_defconfig
+++ b/configs/draco_defconfig
@@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
index e7a3d22..7d639ea 100644
--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
index 6063259..90783b4 100644
--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -55,6 +55,7 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig
index ce6981e..c0947e9 100644
--- a/configs/rastaban_defconfig
+++ b/configs/rastaban_defconfig
@@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
diff --git a/configs/rut_defconfig b/configs/rut_defconfig
index b31eb97..685b4c8 100644
--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -56,6 +56,7 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig
index 4a3c0cd..f5d1077 100644
--- a/configs/thuban_defconfig
+++ b/configs/thuban_defconfig
@@ -52,6 +52,7 @@ CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index e905295..40a0755 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -28,6 +28,18 @@ config BOOTCOUNT_AM33XX
This requires the RTC clocks, etc, to be enabled prior to use and
not all boards with this IP block on it will have the RTC in use.
+config BOOTCOUNT_ENV
+ bool "Boot counter in environment"
+ help
+ If no softreset save registers are found on the hardware
+ "bootcount" is stored in the environment. To prevent a
+ saveenv on all reboots, the environment variable
+ "upgrade_available" is used. If "upgrade_available" is
+ 0, "bootcount" is always 0, if "upgrade_available" is
+ 1 "bootcount" is incremented in the environment.
+ So the Userspace Application must set the "upgrade_available"
+ and "bootcount" variable to 0, if a boot was successfully.
+
endchoice
config SYS_BOOTCOUNT_SINGLEWORD
diff --git a/include/configs/siemens-am33x-common.h
b/include/configs/siemens-am33x-common.h
index 838e8d0..ed4b6cd 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -499,6 +499,4 @@
#define CONFIG_RESET_TO_RETRY
#define CONFIG_BOOT_RETRY_TIME 60
-#define CONFIG_BOOTCOUNT_ENV
-
#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index ccaac48..1559a29 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -148,7 +148,6 @@ CONFIG_BOOGER
CONFIG_BOOM
CONFIG_BOOTBLOCK
CONFIG_BOOTCOUNT_ALEN
-CONFIG_BOOTCOUNT_ENV
CONFIG_BOOTCOUNT_I2C
CONFIG_BOOTCOUNT_RAM
CONFIG_BOOTFILE
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
