The patch adds support for the Freescale mx51 processor.
Signed-off-by: Stefano Babic <sba...@denx.de>
Signed-off-by: Fred Fan <fanyef...@gmail.com>
---
drivers/serial/serial_mxc.c | 18 ++++++++++++------
1 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index acc5b7d..b21c9c3 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -49,8 +49,18 @@
#define UART_PHYS 0x1001b000
#elif defined(CONFIG_SYS_MX27_UART6)
#define UART_PHYS 0x1001c000
+#elif defined(CONFIG_SYS_MX51_UART1)
+#define UART_PHYS UART1_BASE_ADDR
+#elif defined(CONFIG_SYS_MX51_UART2)
+#define UART_PHYS UART2_BASE_ADDR
+#elif defined(CONFIG_SYS_MX51_UART3)
+#define UART_PHYS UART3_BASE_ADDR
#else
-#error "define CONFIG_SYS_MX31_UARTx to use the mx31 UART driver"
+#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver"
+#endif
+
+#ifdef CONFIG_SERIAL_MULTI
+#warning "MXC driver does not support MULTI serials."
#endif
/* Register definitions */
@@ -166,11 +176,7 @@ DECLARE_GLOBAL_DATA_PTR;
void serial_setbrg (void)
{
-#ifdef CONFIG_MX31
- u32 clk = mx31_get_ipg_clk();
-#else
- u32 clk = imx_get_perclk1();
-#endif
+ u32 clk = imx_get_uartclk();
if (!gd->baudrate)
gd->baudrate = CONFIG_BAUDRATE;
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
