On 02/12/2018 03:52 PM, Mariano Coromac wrote: > Hello, I was hoping you could help me out with something. I just have 2 > main questions. I am using a SAMA5D27 and I've managed to port > AT91Bootloader and I'm currently on U-Boot
U-Boot SPL can bring SAMA5D2 up, you don't need the AT91 bootloader. > 1. I am trying to use FLEXCOM1 (UART) as the main console of U-Boot but > haven't been able to find any documentation saying where or how U-Boot > specifies the console port. $ git grep DEBUG_UART configs/sama5d2* configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART=y configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_ATMEL=y configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_BASE=0xf8020000 configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_CLOCK=82000000 configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_BOARD_INIT=y configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_ANNOUNCE=y would indicate there's a debug uart which you can use. I'm adding atmel maintainer to CC and dropping dead contacts. > 2. When U-Boot tries to boot it gives me these errors: > > bind node sdio-host@a0000000 > - attempt to match compatible string 'atmel,sama5d2-sdhci' > No match for node 'sdio-host@a0000000' > bind node sdio-host@b0000000 > - attempt to match compatible string 'atmel,sama5d2-sdhci' > No match for node 'sdio-host@b0000000' > bind node apb > - attempt to match compatible string 'simple-bus' > - found match at 'generic_simple_bus' > bind node pmc@f0014000 > - attempt to match compatible string 'atmel,sama5d2-pmc' > - found match at 'at91-pmc' > bind node mainck > - attempt to match compatible string 'atmel,at91sam9x5-clk-main' > - found match at 'at91sam9x5-main-osc-clk' > bind node pllack@0 > - attempt to match compatible string 'atmel,sama5d3-clk-pll' > - found match at 'at91-plla-clk' > bind node utmick > - attempt to match compatible string 'atmel,at91sam9x5-clk-utmi' > No match for node 'utmick' > bind node masterck > - attempt to match compatible string 'atmel,at91sam9x5-clk-master' > - found match at 'at91-master-clk' > bind node h32mxck > - attempt to match compatible string 'atmel,sama5d4-clk-h32mx' > No match for node 'h32mxck' > bind node periph32ck > - attempt to match compatible string 'atmel,at91sam9x5-clk-peripheral' > - found match at 'sam9x5-periph-clk' > Cannot create device named 'uart1_clk@25' (err=-12) > Error binding driver 'sam9x5-periph-clk': -12 > bind node periph64ck > - attempt to match compatible string 'atmel,at91sam9x5-clk-peripheral' > - found match at 'sam9x5-periph-clk' > Error binding driver 'sam9x5-periph-clk': -12 > bind node gck > - attempt to match compatible string 'atmel,sama5d2-clk-generated' > No match for node 'gck' > Some drivers failed to bind > Error binding driver 'at91-pmc': -12 > bind node spi@f8000000 > - attempt to match compatible string 'atmel,at91rm9200-spi' > No match for node 'spi@f8000000' > bind node serial@f8038200 > - attempt to match compatible string 'atmel,at91sam9260-usart' > - found match at 'serial_atmel' > Error binding driver 'serial_atmel': -12 > bind node gpio@fc038000 > - attempt to match compatible string 'atmel,sama5d2-gpio' > - found match at 'gpio_atmel_pio4' > Error binding driver 'gpio_atmel_pio4': -12 > Some drivers failed to bind > Error binding driver 'generic_simple_bus': -12 > Some drivers failed to bind > Error binding driver 'generic_simple_bus': -12 > Some drivers failed to bind > initcall sequence 26f20864 failed at call 26f073e4 (err=-12) > ### ERROR ### Please RESET the board ### > > NOTE: On my lists.c file I changed all the "dm_debug" for "dm_warn" > because the debug uart is the only one that's responding. > Any help or guidance would be really appreciated. Seems like some drivers are disabled. Which version of U-Boot do you use ? What platform did you derive your configuration from ? -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
