On Sun, 11 Feb 2018 12:06:51 +0000 Alex Kiernan <alex.kier...@gmail.com> wrote:
> This converts the following to Kconfig: > CONFIG_BOOTCOUNT_I2C > > Signed-off-by: Alex Kiernan <alex.kier...@gmail.com> > --- > > README | 6 ------ > configs/ids8313_defconfig | 1 + > drivers/bootcount/Kconfig | 9 +++++++++ > include/configs/ids8313.h | 1 - > scripts/config_whitelist.txt | 1 - > 5 files changed, 10 insertions(+), 8 deletions(-) > > diff --git a/README b/README > index 20637e0..a7b0890 100644 > --- a/README > +++ b/README > @@ -2321,12 +2321,6 @@ The following options need to be configured: > enable special bootcounter support on at91sam9xe > based boards. CONFIG_SOC_DA8XX > enable special bootcounter support on da850 based > boards. > - CONFIG_BOOTCOUNT_I2C > - enable support for the bootcounter on an i2c (like > RTC) device. > - CONFIG_SYS_I2C_RTC_ADDR = i2c chip address > - CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which > is used for > - the bootcounter. > - CONFIG_BOOTCOUNT_ALEN = address len > CONFIG_BOOTCOUNT_EXT > enable support for the bootcounter in EXT filesystem > CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used > for read diff --git a/configs/ids8313_defconfig > b/configs/ids8313_defconfig index 3e67c55..eb931ce 100644 > --- a/configs/ids8313_defconfig > +++ b/configs/ids8313_defconfig > @@ -30,6 +30,7 @@ > CONFIG_MTDIDS_DEFAULT="nor0=ff800000.flash,nand0=e1000000.flash" > CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:7m(dum),768k(BOOT-BIN),128k(BOOT-ENV),128k(BOOT-REDENV);e1000000.flash:-(ubi)" > CONFIG_CMD_UBI=y CONFIG_BOOTCOUNT_LIMIT=y > +CONFIG_BOOTCOUNT_I2C=y > # CONFIG_MMC is not set > CONFIG_MTD_NOR_FLASH=y > CONFIG_PHYLIB=y > diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig > index eabfd13..8c19ae6 100644 > --- a/drivers/bootcount/Kconfig > +++ b/drivers/bootcount/Kconfig > @@ -46,6 +46,15 @@ config BOOTCOUNT_RAM > Store the bootcount in DRAM protected against against bit > errors due to short power loss or holding a system in RESET. > > +config BOOTCOUNT_I2C > + bool "Boot counter on I2C device" > + help > + Enable support for the bootcounter on an i2c (like RTC) > device. > + CONFIG_SYS_I2C_RTC_ADDR = i2c chip address > + CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for > + the bootcounter. > + CONFIG_BOOTCOUNT_ALEN = address len > + > endchoice > > config SYS_BOOTCOUNT_SINGLEWORD > diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h > index 529cbf1..fe39221 100644 > --- a/include/configs/ids8313.h > +++ b/include/configs/ids8313.h > @@ -516,7 +516,6 @@ > #define CONFIG_MTD_PARTITIONS > > /* bootcount support */ > -#define CONFIG_BOOTCOUNT_I2C > #define CONFIG_BOOTCOUNT_ALEN 1 > #define CONFIG_SYS_BOOTCOUNT_ADDR 0x9 > > diff --git a/scripts/config_whitelist.txt > b/scripts/config_whitelist.txt index 487c790..aa1d51f 100644 > --- a/scripts/config_whitelist.txt > +++ b/scripts/config_whitelist.txt > @@ -148,7 +148,6 @@ CONFIG_BOOGER > CONFIG_BOOM > CONFIG_BOOTBLOCK > CONFIG_BOOTCOUNT_ALEN > -CONFIG_BOOTCOUNT_I2C > CONFIG_BOOTCOUNT_LIMIT > CONFIG_BOOTFILE > CONFIG_BOOTMAPSZ Reviewed-by: Lukasz Majewski <lu...@denx.de> Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
pgpExZaCj6jXV.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
