On Fri, Feb 9, 2018 at 7:00 AM, Andre Przywara <andre.przyw...@arm.com> wrote: > Compared to the last post, this converts U-Boot's DTs over to use the > new binding, so that the final patch can remove support for the old > binding from U-Boot EMAC driver. > The Linux DTs can be synced in later once we solved the size problem. > > ================================================ > The existing sun8i-emac driver in U-Boot uses some preliminary bindings, > which matched our own DTs. Now that the Linux kernel got a driver, lets > update our probe code to handle those Linux DTs as well. > The first patch adds the missing compatible strings for the pinctrl drivers, > which is needed for using the sunxi_name_to_gpio() lookup function. > Patch 2/7 updates the pinctrl parser used in the sun8i-emac driver, to cope > with the new, generic Allwinner pinctrl bindings. > Patch 3/7 extends the probe routine in the Ethernet driver to deal > with both the old and the new bindings. > Patches 4, 5 and 6 update U-Boot's DTs for boards using the A64, H3 and H5 > SoC, respectively, to actually use the new binding in their EMAC nodes. > This allows the final patch 7/7 to remove the support for the old binding > in the EMAC driver, so we use the proper binding only. > This series allows to copy in the DTs from the latest kernel. Unfortunately > right now updating the DTs for the H5 and A64 breaks the build, as the > resulting binary (which embeds the DT) gets to large and triggers our new > image size check. As the H5 and H3 share most of the DT, we can't just > update the H3 DTs either.
Same case with me with USB PHY changes, better to check size by disabling dts changes on H5/A64 if OK, then will move this to next. Once FAT transition done we can take them back - this is what I'm thinking as of now. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
