On Thu, Feb 8, 2018 at 9:47 PM, Bryan O'Donoghue <bryan.odonog...@linaro.org> wrote: > >>> >>> I'm observing authentication issue while loading U-Boot proper, U-Boot >>> proper now have features like SPL DM and SPL FIT etc >>> >>> U-Boot SPL 2018.03-rc1-00182-gb81f7c9 (Feb 08 2018 - 17:19:03 +0530) >>> Trying to boot from MMC1 >>> Expected Linux image is not found. Trying to start U-boot >>> >>> Authenticate image from DDR location 0x17800000... >>> bad magic magic=0xb8 length=0x841b version=0x17 >>> bad length magic=0xb8 length=0x841b version=0x17 >>> bad version magic=0xb8 length=0x841b version=0x17 >>> spl: ERROR: image authentication unsuccessful >>> ### ERROR ### Please RESET the board ### >>> >>> Please let me know where I missed, I'm authenticating SPL and >>> u-boot-dtb.img now. >> >> >> Can you please check if the generated u-boot-dtb.img contains a IVT >> table appended in the end of the image? >> >> The mx6slevk_spl_defconfig target also generates SPL + u-boot-dtb.img >> but I have to use the u-boot-ivt.img binary instead. In my case >> u-boot-dtb.img does not includes a IVT table. >> >> Best Regards, >> Breno Lima >> > > At a guess I'd say it's the fix we did for hab_auth_img - I guess Jagan you > have an out-of-tree implementation here ?
Basically I'm trying to compare this with implementation before, look like issue is IVT image signature is missing for when CONFIG_SPL_LOAD_FIT defined. It's working without SPL_LOAD_FIT. > > If you have a command in your environment that looks like this > > hab_auth_img 0x17800000 0x10000 > > that should now be > > hab_auth_img 0x17800000 0x10000 0xF400 > > assuming the CSF footer is aprox 0xC00 bytes padded. > > git show c5800b2 > > arm: imx: hab: Fix authenticate_image input parameters > > 1: Adding a new parameter to hab_auth_img > - addr : image hex address > - length : total length of the image > - offset : offset of IVT from addr > I've created u-boot-ivt.image which we did in previous releases[2] and padded 0x2000 to CSF to align the size of CONFIG_CSF_SIZE Image Name: U-Boot 2018.03-rc1-00182-gb81f7c Created: Fri Feb 9 11:00:05 2018 Image Type: ARM U-Boot Firmware with HABv4 IVT (uncompressed) Data Size: 360384 Bytes = 351.94 KiB = 0.34 MiB Load Address: 17800000 Entry Point: 00000000 HAB Blocks: 0x177fffc0 0x0000 0x00056020 icorem6qdl-rqs> hab_auth_img 0x177fffc0 0x58020 0x56020 Authenticate image from DDR location 0x177fffc0... bad magic magic=0xd4 length=0x5000 version=0x41 bad length magic=0xd4 length=0x5000 version=0x41 [2] https://openedev.amarulasolutions.com/display/ODUBOOT/i.MX6+HABv4#i.MX6HABv4-SignedBoot-Usage _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
