Migrate the base and sub-options to Kconfig. Note that we only enable
this in the base sandbox config now.
Cc: Alexey Brodkin <alexey.brod...@gmail.com>
Cc: Michal Simek <michal.si...@xilinx.com>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
Is this driver still used anywhere? It's fishy that it's only enabled
in sandbox anymore.
---
README | 12 ------------
configs/sandbox_defconfig | 3 +++
drivers/block/Kconfig | 18 ++++++++++++++++++
include/configs/sandbox.h | 4 ----
4 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/README b/README
index 2f9034ed5e22..57d985d0f1d4 100644
--- a/README
+++ b/README
@@ -2274,18 +2274,6 @@ The following options need to be configured:
CONFIG_SF_DEFAULT_MODE (see include/spi.h)
CONFIG_SF_DEFAULT_SPEED in Hz
- CONFIG_SYSTEMACE
-
- Adding this option adds support for Xilinx SystemACE
- chips attached via some sort of local bus. The address
- of the chip must also be defined in the
- CONFIG_SYS_SYSTEMACE_BASE macro. For example:
-
- #define CONFIG_SYSTEMACE
- #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000
-
- When SystemACE support is added, the "ace" device type
- becomes available to the fat commands, i.e. fatls.
- TFTP Fixed UDP Port:
CONFIG_TFTP_PORT
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 41a2e34235dd..3acf9089cdb4 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -80,6 +80,9 @@ CONFIG_DEVRES=y
CONFIG_DEBUG_DEVRES=y
CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
+CONFIG_SYSTEMACE=y
+CONFIG_SYS_SYSTEMACE_BASE=0x0
+CONFIG_SYS_SYSTEMACE_WIDTH=16
CONFIG_CLK=y
CONFIG_CPU=y
CONFIG_DM_DEMO=y
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 26760895f99d..e2c80f2075e2 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -38,3 +38,21 @@ config IDE
This allows access to raw blocks and filesystems on an IDE drive
from U-Boot. See also CMD_IDE which provides an 'ide' command for
performing various IDE operations.
+
+config SYSTEMACE
+ bool "Xilinx SystemACE support"
+ help
+ Adding this option adds support for Xilinx SystemACE chips attached
+ via some sort of local bus. The address of the chip must also be
+ defined in the CONFIG_SYS_SYSTEMACE_BASE macro.
+
+ When SystemACE support is added, the "ace" device type becomes
+ available to the fat commands, i.e. fatls.
+
+config SYS_SYSTEMACE_BASE
+ hex "Base address of SystemACE chip"
+ depends on SYSTEMACE
+
+config SYS_SYSTEMACE_WIDTH
+ int "Word size of access to the of SystemACE chip"
+ depends on SYSTEMACE
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index de1c8a2a3855..b0a749caecc2 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -142,10 +142,6 @@
#define CONFIG_SYS_SATA_MAX_DEVICE 2
-#define CONFIG_SYSTEMACE
-#define CONFIG_SYS_SYSTEMACE_WIDTH 16
-#define CONFIG_SYS_SYSTEMACE_BASE 0
-
#define CONFIG_MISC_INIT_F
#endif
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
