On 01/30/2018 09:15 AM, Stefan Mavrodiev wrote:
On 01/22/2018 10:36 AM, Jagan Teki wrote:
On Tue, Jan 2, 2018 at 4:31 PM, Stefan Mavrodiev
<stefan.mavrod...@gmail.com> wrote:
On 12/26/2017 11:47 AM, Jagan Teki wrote:
On Fri, Dec 22, 2017 at 3:30 PM, Stefan Mavrodiev <ste...@olimex.com>
wrote:
Driver testing is done with A20-OLinuXino-Lime2. Testing
requirements are:
- Exposing spi0 alternative pins in the dts file
- Add alias node, enabling driver probing
- Enable spi flash related options in the defconfig file
The testing log is:
U-Boot SPL 2018.01-rc2-00023-gfa13cb3-dirty (Dec 22 2017 -
11:39:48)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from sunxi SPI
U-Boot 2018.01-rc2-00023-gfa13cb3-dirty (Dec 22 2017 -
11:39:48 +0200)
Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Model: Olimex A20-OLinuXino-LIME2
Lime2 doen't have in-built spi-nor is it?
We have some prototypes with this option.
I've Rev.6 does it have spi-nor?
I assume Rev.6 is actually Rev.F. The first prototype with SPI flash
is Rev.I (Rev.9).
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
MMC: no card present
mmc_init: -123, time 1
*** Warning - MMC init failed, using default environment
you lost the env? since it's spi-nor better to use flash env.
What's the point since this is only test case?
this can be an issue if we boot the system from spi-nor, where we can
get saved env.
In: serial
Out: serial
Err: serial
Allwinner mUSB OTG (Peripheral)
SCSI: SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: No ethernet found.
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s)
found
Hit any key to stop autoboot: 0
=> sspi
=> sf probe
SF: Detected w25q128bv with page size 256 Bytes, erase size 4
KiB,
total 16 MiB
try to use erase/write and read commands to verify
# Erase one sector
=> sf erase 0x1000 0x100
SF: 256 bytes @ 0x1000 Erased: ERROR
=> sf erase 0x1000 0x1000
SF: 4096 bytes @ 0x1000 Erased: OK
# Get some random data
=> md.b 0x50000000 0x100
50000000: d6 4d d0 7e 93 d8 0f 48 1b ef 7f 7e be 4e a8 5d
.M.~...H...~.N.]
50000010: fd 9f e5 7f 2f 7b 5b 19 ed de d8 58 99 7a 24 da
..../{[....X.z$.
50000020: ef dd 9c 45 d7 97 ab 4f e7 fb ee 61 bc de 6a 1a
...E...O...a..j.
50000030: 9a 9f f4 3a be 4b 2f f3 ce 77 87 7e 07 23 af ff
...:.K/..w.~.#..
50000040: e5 e5 c0 fa 65 e2 78 9b 16 38 42 52 e5 6c 52 0d
....e.x..8BR.lR.
50000050: f5 ff da 94 7f 98 96 d7 f0 9d 66 ae 9b b9 a2 cd
..........f.....
50000060: 0b dd f1 c9 1d 3b fe 5b cf ef d6 ce 8b c5 fd 56
.....;.[.......V
50000070: e2 52 eb 78 d4 f1 bf 57 56 6a 57 58 52 f1 0e 9d
.R.x...WVjWXR...
50000080: df be f8 19 bf cf d7 ac 4b 3e 86 21 3f c3 fe 3e
........K>.!?..>
50000090: ea 27 52 ca 1f 79 bd 7b ef bf 96 c9 9d f6 81 d3
.'R..y.{........
500000a0: cc 2e 8b c8 34 7f c5 2f 29 19 a8 dc 54 7a 07 1d
....4../)...Tz..
500000b0: f4 e6 db ed 38 03 59 bb 31 ee b3 dd 5c e6 be 58
....8.Y.1...\..X
500000c0: a6 7c 87 61 84 47 e0 b1 a1 fc 6e d3 d5 93 bf 8a
.|.a.G....n.....
500000d0: 5d a3 be 4b cf 07 1d 92 ff 36 f9 46 fb 5a cb 8f
]..K.....6.F.Z..
500000e0: f9 27 7a b8 7b 07 2e 22 a1 ee 56 bc a7 de 57 6a
.'z.{.."..V...Wj
500000f0: da d4 7d 7f ee db 7a e2 bc 5c 44 64 b7 fc ea 3e
..}...z..\Dd...
# Write one page to spi-nor
=> sf write 0x50000000 0x1000 0x100
device 0 offset 0x1000, size 0x100
SF: 256 bytes @ 0x1000 Written: OK
# Readback data
=> sf read 0x51000000 0x1000 0x100
device 0 offset 0x1000, size 0x100
SF: 256 bytes @ 0x1000 Read: OK
# Compare data
=> cmp.b 0x50000000 0x51000000 0x100
Total of 256 byte(s) were the same
=> sf test 0 100000
SPI flash test:
0 erase: 11407 ticks, 89 KiB/s 0.712 Mbps
1 check: 8881 ticks, 115 KiB/s 0.920 Mbps
2 write: 10824 ticks, 94 KiB/s 0.752 Mbps
3 read: 8872 ticks, 115 KiB/s 0.920 Mbps
Test passed
0 erase: 11407 ticks, 89 KiB/s 0.712 Mbps
1 check: 8881 ticks, 115 KiB/s 0.920 Mbps
2 write: 10824 ticks, 94 KiB/s 0.752 Mbps
3 read: 8872 ticks, 115 KiB/s 0.920 Mbps
=>
Signed-off-by: Stefan Mavrodiev <ste...@olimex.com>
---
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 21
+++++++++++++++++++++
configs/A20-OLinuXino-Lime2_defconfig | 8 ++++++++
2 files changed, 29 insertions(+)
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
index d5c796c..3c708da 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -54,6 +54,7 @@
aliases {
serial0 = &uart0;
+ spi0 = &spi0;
};
chosen {
@@ -215,6 +216,20 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ spi0_pins_b: spi0@1 {
+ allwinner,pins = "PC0", "PC1", "PC2";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_cs0_pins_b: spi0_cs0@1 {
+ allwinner,pins = "PC23";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
@@ -257,6 +272,12 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_b>, <&spi0_cs0_pins_b>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/configs/A20-OLinuXino-Lime2_defconfig
b/configs/A20-OLinuXino-Lime2_defconfig
index 1edc844..c499e3d 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -30,3 +30,11 @@ CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SF_TEST=y
Ok, but not useful to include in config's
+CONFIG_CMD_SPI=y
drop this.
Hi,
I have problem with the driver. I'm not sure where the problem is.
Without calling sspi first, sf probe doesn't work. I guess driver
doesn't bind.
The output is:
=> sf probe
Invalid chip select 0:0 (err=-19)
Failed to initialize SPI flash at 0:0
Maybe I'm missing something?
Regards,
Stefan Mavrodiev
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
