I have a recent problem with USB storage on the Raspberry Pi 3 with
U-Boot. Take a look at the output from v2017.01:
------
USB0: Core Release: 2.80a
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
scanning usb for ethernet devices... 1 Ethernet Device(s) found
Hit any key to stop autoboot: 0
U-Boot>
------
which is the correct output. And compare to v2018.01:
------
USB0: Core Release: 2.80a
scanning bus 0 for devices... unable to get device descriptor(error=-110)
3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
U-Boot>
------
I'm unable to use USB storage afterwards, such as "ls usb 0".
I have bisected the commits and found that the problem was introduced in
the commit below. I am not familiar enough with USB internals to comment
on the correctness of the commit, but apparently it's not working
entirely as expected. Maybe the original author can comment?
------
commit c008faa77358bb5b313696dd1d5bb8afa03a6ca2
Author: Bin Meng <bmeng...@gmail.com>
Date: Mon Sep 18 15:40:42 2017
usb: Only get 64 bytes device descriptor for full speed devices
Full speed device endpoint 0 can have 8/16/32/64 bMaxPacketSize0.
Other speed devices report fixed value per USB spec. So it only
makes sense if we send a get device descriptor with 64 bytes to
full speed devices.
While we are here, update the comment block to be within 80 cols.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
------
--
Kristian
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
