On 01/30/2018 12:41 AM, Derald D. Woods wrote:
On Mon, Jan 29, 2018 at 07:46:09AM -0600, Derald Woods wrote:
On Jan 29, 2018 6:57 AM, "Alexander Graf" <ag...@suse.de> wrote:
Commit 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails")
added code to search for more serial devices if the default one was not
probed correctly.
Unfortunately, that breaks omap3_evm. So while investigating why that is
the case, let's disable the full search for everyone but bcm283x where it
is needed.
Fixes: 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails")
Reported-by: Derald D. Woods <woods.techni...@gmail.com>
Signed-off-by: Alexander Graf <ag...@suse.de>
---
Derald, could you please test this patch and verify it does indeed unbreak
omap3_evm?
The omap3_evm boots now with this patch applied on master. If I enable
SERIAL_SEARCH_ALL, it does not boot. I always build cleanly using the
default config only. On failure, there is no console input/output and
the board unresponsive.
So SPL is already broken? Can you try a known working SPL with
SERIAL_SEARCH_ALL=y U-Boot payload on top? Does that work?
Alex
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
