Am 16.01.2010 17:30, schrieb Tom:
> Instead of adding CONFIG_VIDEO_JADEGDC, define VIDEO_FB_16BPP_WORD_SWAP
> in your board config file or a more appropriate file.
Done.
>> +/*
>> + * Graphic Device
>> + */
>> +GraphicDevice jadegdc;
>
> It does not look like this global is accessed output of this function
> It should be declared static.
Done.
>> +
>> +void *video_hw_init(void)
>> +{
>> + GraphicDevice *pGD =&jadegdc;
>> + struct ctfb_res_modes var_mode[2];
>> + unsigned long *vid;
>> + unsigned long div;
>> + unsigned long dspBase[2];
>> + char *penv;
>> + int bpp;
>> + int i, j;
>> +
>> + memset(pGD, 0, sizeof(GraphicDevice));
>> +
>> + dspBase[0] = JADE_GDC_DISP0_PHYS_BASE;
>> + dspBase[1] = JADE_GDC_DISP1_PHYS_BASE;
>> +
>> + pGD->gdfIndex = GDF_15BIT_555RGB;
>> + pGD->gdfBytesPP = 2;
>> +
>> + pGD->memSize = VIDEO_MEM_SIZE;
>> + pGD->frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
>> + vid = (unsigned long *)pGD->frameAdrs;
>> +
>> + for (i = 0; i< 2; i++) {
>> + char varName[32];
>> + u32 dcm1, dcm2, dcm3;
>> + u16 htp, hdp, hdb, hsp, vtr, vsp, vdp;
>> + u8 hsw, vsw;
>> + u32 l2m, l2em, l2oa0, l2da0, l2oa1, l2da1;
>> + u16 l2dx, l2dy, l2wx, l2wy, l2ww, l2wh;
>> +
>> + sprintf(varName, "gs_dsp_%d_param", i);
>> +
>> + penv = getenv(varName);
>> + if (penv == NULL) {
>> + penv = getenv("videomode");
>> + if ((i == 1) || (penv == NULL))
>> + continue;
>
> This check for (i == 1) should be moved before the getenv
Done.
>> +/*
>> + * Set a RGB color in the LUT
>> + */
>> +void video_set_lut(unsigned int index, unsigned char r,
>> + unsigned char g, unsigned char b)
>> +{
>
> If leaving this a noop is intentional, add a comment.
Done.
Thanks for checking.
Regards,
Matthias
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
