> The rv1108 GMAC only support rmii interface, so need to add the > set_rmii() ops. Use the phy current interface to set rmii or > rgmii ops. At the same time, need to set the mac clock rate of > rmii with 50M, the clock rate of rgmii with 125M. > > Signed-off-by: David Wu <david...@rock-chips.com> > --- > > Changes in v3: > - return error if there was no set_to_rgmii ops at rgmii case > - return error if there was no set_to_rmii ops at rmii case > - set and check clock rate when gmac clock is internal pll. > > Changes in v2: > - Add check whether the set rgmii/rmii function is a valid function pointer > - Clean the grf offset at gmac_rockchip.c > - Use current phy interface to set mac clock rate > > drivers/net/gmac_rockchip.c | 115 > +++++++++++++++++++++++++++++++++++++++++--- > 1 file changed, 109 insertions(+), 6 deletions(-) >
Acked-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
